CONTROL GP-VOLTAGE 3184653 - Caterpillar

1. Secure rod end of the steering cylinder with a strap and remove two bolts (1), and remove retainer (2). 2. Using tooling (A), remove pin (4) and five lubrications lines (3).3. Make a separation of the front link, the rear link, and steering cylinder. 4. Secure the rear steering link with a strap and remove two bolts and retainer (6) from the bottom of the steering link in the exact manner as step 1.5. Using tooling (A), remove pin (5) in the exact manner as step (2). 6. Remove rear link (10). Weight of link is 41 kg (90 lb).7. Repeat steps 4, 5 and 6 on front steering link (9). In addition remove one nut (8) and remove servo cylinder rod end (7) from front link. Front steering link weight is 45 kg (100 lb). The following steps are for installation of the steering links.8. Put front link (9) in position and install servo cylinder rod end (7) and nut (8). Install the pin, retainer and two bolts securing the front link to the frame..9. Put the rear link (10) in position and install pin (5), retainer and two bolts (6).10. Align the front link, rear link, steering cylinder and install pin (4).11. Install retainer (2) and two bolts (1).12. Install five lubrication lines (3).13. Lubricate each of the joints upon completion of installation. See Operation And Maintenance Manual for type of lubricant.