CONTROL GP-JOYSTICK 3218288 - Caterpillar

Removal Procedure
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Remove the ether starting aid.Reference: For more information about the removal of the ether starting aid, refer to the Service Manual module Operation and Maintenance Manual, "Ether Starting Aid".
Illustration 1 g00743264
Loosen clamp (1) that holds the ejector assembly (2) in position. Remove ejector assembly (2) from muffler assembly (3) .
Illustration 2 g00743265
In order to access the muffler assembly (3), open the right hand doors (4).
Illustration 3 g00743266
Note: For photographic reasons, the hood assembly has been removed.
Loosen hose clamp (5), and disconnect flexible hose (6) from muffler assembly (3) .
Illustration 4 g00743268
Remove two bolts, nuts and washers (7), that hold muffler assembly (3) to the mounting bracket (8) .
Illustration 5 g00743271
Loosen clamp (9), and remove muffler assembly (3) from the machine.Installation Procedure
Illustration 6 g00743271
Illustration 7 g00743268
Position the muffler assembly (3) on the machine. Attach muffler assembly (3) and clamp (9) to the turbocharger. Install the two bolts, nuts and washers (7) that hold muffler assembly (3) to the mounting bracket (8). Tighten the nut on clamp (9) to the following torque 25 7 N m (20 5 lb ft).
Illustration 8 g00743266
Connect the flexible hose (6) to muffler assembly (3). Tighten the hose clamp (5) .
Illustration 9 g00743264
Put a light coat of 5P-3931 Anti-Seize Compound on the clamped area of the muffler assembly (3) and ejector assembly (2). Put a light coat of 5P-3931 Anti-Seize Compound on the threads on clamp (1). Install ejector assembly (2) to muffler assembly (3). Tighten the bolt for clamp (1) to the following torque 30 7 N m (20 5 lb ft).
Install the ether starting aid.Reference: for more information on installation of the ether starting aid, refer to the Service Manual module Operation and Maintenance Manual, "Ether Starting Aid".
Illustration 10 g00743265
Close the engine access doors (4) .