CONTROL & MTG GP-ENGINE ELEK 3484046 - Caterpillar

1. Remove floor mat (1) from the cab. 2. Remove spring pin and pin (3) from the treadle assembly and plate. Remove treadle assembly (2). 3. Remove bolts (4) that hold the plate to the floor plate and brake control valve. Remove plate assembly (5).Install Brake Pedal
1. Put plate assembly (1) in position on the brake control valve and floor plate. Install the bolts that hold it. 2. Put treadle assembly (2) in position on the plate. Install pin (3) in the treadle assembly and plate. Install the spring pin in the treadle assembly and pin.3. Install the floor mat in the cab.Disassemble Brake Pedal
start by:a) remove brake pedal 1. Remove cotter pin and pin (2). Remove roller (3) from treadle (1). 2. Remove boot (6) and plunger (5) from plate (4) as a unit. Remove the boot from the plunger.3. Remove button (7) from the plate.Assemble Brake Pedal
1. Install boot (3) on plunger (2). Install plunger and boot in plate (1).2. Install button (4) in plate. 3. Put roller (6) in position in treadle (7). Install pin (5) and cotter pin.end by:a) install brake pedal