CONTROL GP-SERVICE BRAKE 3518347 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 180-3034 Repair Stand Set 1
C 1P-0520 Driver Gp 1
Illustration 1 g01234362
Use Tooling (C) in order to install bearings (14) into boom assembly (11).
Illustration 2 g01233290
Install pin assembly (10) that retained the head end of the stick cylinder. Install bolt (9). Attach a suitable lifting device to pin assembly (10). Pin assembly (10) will be used for the installation of boom assembly (11). The weight of boom assembly (11) is approximately 137 kg (302 lb).
Illustration 3 g01233291
Illustration 4 g01233293
Install boom assembly (11). Install pin assembly (12) and bolt (13).
Illustration 5 g01233285
Connect hose assemblies (8) and clip (7).
Illustration 6 g01233224
Connect harness assemblies (4) and (5). Install cable straps (6).
Illustration 7 g01233220
Illustration 8 g01233222
Attach a suitable lifting device to the rod end of boom cylinder (3). The weight of the rod end of boom cylinder (3) is approximately 25 kg (55 lb). Raise the rod end of boom cylinder off Tooling (A) and into position. Install pin assembly (2) and bolt (1). End By:
Install the stick. Refer to Disassembly and Assembly, "Stick- Install".
Install the stick cylinder. Refer to Disassembly and Assembly, "Stick Cylinder - Remove and Install".