3722912 CONTROL GP-UNPROGRAMMED Caterpillar parts
C-9, C13, C15, C7, C9, TH31-E61
Rating:
Alternative (cross code) number:
CA3722912
372-2912
3722912
CA3722912
372-2912
3722912
Weight: 9 pounds 4 kg.
PETROLEUM TRANSMISSION, TRUCK ENGINE,
Related part:
3722912
CONT GP -E
10R6199
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
3722912 3722905 ECU ECM, Original Quality, programmable Compatible with Caterpillar
YONGHPQ Advanced diagnosis function: integrated with advanced fault diagnosis circuit and software, it can quickly and accurately detect the faults of the motherboard and connected equipment, facilitate maintenance personnel to locate problems and improve maintenance efficiency. || High compatibility: it is suitable for a variety of car models and brands, whether it is a popular model or a niche model, it can be easily installed without worrying about compatibility issues. || High-quality electronic components: high-quality electronic components such as capacitors and resistors are selected, which have the characteristics of low leakage, long life and high stability, greatly improving the overall reliability and durability of the motherboard. || Excellent performance: advanced chipset is adopted, with powerful computing power, which ensures that the automobile computer can run all kinds of complex programs and tasks efficiently. || Accurate clock synchronization: Built-in high-precision clock chip ensures the accuracy of the system clock, makes the components of the automobile computer work more harmoniously, and avoids abnormal program operation caused by clock deviation.
YONGHPQ Advanced diagnosis function: integrated with advanced fault diagnosis circuit and software, it can quickly and accurately detect the faults of the motherboard and connected equipment, facilitate maintenance personnel to locate problems and improve maintenance efficiency. || High compatibility: it is suitable for a variety of car models and brands, whether it is a popular model or a niche model, it can be easily installed without worrying about compatibility issues. || High-quality electronic components: high-quality electronic components such as capacitors and resistors are selected, which have the characteristics of low leakage, long life and high stability, greatly improving the overall reliability and durability of the motherboard. || Excellent performance: advanced chipset is adopted, with powerful computing power, which ensures that the automobile computer can run all kinds of complex programs and tasks efficiently. || Accurate clock synchronization: Built-in high-precision clock chip ensures the accuracy of the system clock, makes the components of the automobile computer work more harmoniously, and avoids abnormal program operation caused by clock deviation.
3722912 3722905, ECU ECM Compatible with Caterpillar Vehicles, Original, programmable
YONGHPQ Excellent performance: advanced chipset is adopted, with powerful computing power, which ensures that the automobile computer can run all kinds of complex programs and tasks efficiently. || High compatibility: it is suitable for a variety of car models and brands, whether it is a popular model or a niche model, it can be easily installed without worrying about compatibility issues. || Powerful expansion ability: provide rich interfaces and slots, which can easily connect various external devices, such as driving recorder, car audio upgrade module, etc., to meet the needs of diversified function expansion. || Stable power supply system: Equipped with efficient and stable power supply module, it can provide continuous and stable power supply for computer components in different voltage environments, ensure the stable operation of the system, and reduce failures caused by power supply fluctuations. || Excellent heat dissipation design: using unique heat dissipation structure and materials, such as large-area heat sink and high-efficiency heat pipe, can quickly dissipate the heat generated by the motherboard, effectively prevent overheating and frequency reduction, and prolong the service life of the motherboard.
YONGHPQ Excellent performance: advanced chipset is adopted, with powerful computing power, which ensures that the automobile computer can run all kinds of complex programs and tasks efficiently. || High compatibility: it is suitable for a variety of car models and brands, whether it is a popular model or a niche model, it can be easily installed without worrying about compatibility issues. || Powerful expansion ability: provide rich interfaces and slots, which can easily connect various external devices, such as driving recorder, car audio upgrade module, etc., to meet the needs of diversified function expansion. || Stable power supply system: Equipped with efficient and stable power supply module, it can provide continuous and stable power supply for computer components in different voltage environments, ensure the stable operation of the system, and reduce failures caused by power supply fluctuations. || Excellent heat dissipation design: using unique heat dissipation structure and materials, such as large-area heat sink and high-efficiency heat pipe, can quickly dissipate the heat generated by the motherboard, effectively prevent overheating and frequency reduction, and prolong the service life of the motherboard.
Replacement 372-2912 10R-6199 Engine Control Unit Module for Caterpillar C7 C9 C13 C15 Truck Engines, TH31-E61 Petroleum Transmission - ECM ECU Controller
LIUCHUANG Targeted Fit: Designed for Caterpillar C-9, C7, C9, C13, C15 engines and TH31-E61 transmissions; guarantees compatibility || Direct Replacement: Matches reference numbers 372-2912, 10R-6199; simplifies installation || Robust Build: Crafted to factory specs; ensures lasting performance in demanding environments || Adaptive Control: Allows tailored programming; enhances efficiency for petroleum transmission uses || Compatibility Check: Provide ECM number, VIN, and nameplate image; confirms accurate fit
LIUCHUANG Targeted Fit: Designed for Caterpillar C-9, C7, C9, C13, C15 engines and TH31-E61 transmissions; guarantees compatibility || Direct Replacement: Matches reference numbers 372-2912, 10R-6199; simplifies installation || Robust Build: Crafted to factory specs; ensures lasting performance in demanding environments || Adaptive Control: Allows tailored programming; enhances efficiency for petroleum transmission uses || Compatibility Check: Provide ECM number, VIN, and nameplate image; confirms accurate fit
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 3722912:
Information:
Remove & Install Fuel Injection Nozzles And Adapters
*Part of the 8S2245 Cleaning Tool GroupStart By:a. remove valve covers 1. Use tooling (A), and disconnect fuel line (1) at each end. Remove the fuel line from the engine. 2. Use tool (B), and remove retainer (2) from the adapter.3. Remove the fuel injection nozzles with tooling (C) as follows:a. Install the 6V6983 Adapter and the 8T3199 Screw into nozzle assembly (3).b. Install the 8T3198 Tube over the 8T3199 Screw.c. Use the 1B4206 Nut on the 8T3199 Screw.d. Use the 1B4206 Nut on the 8T3199 Screw to pull the fuel injection nozzle from the adapter.4. Remove compression seal (4) and carbon dam seal (8) from fuel injection nozzle (3).5. Use tool (D), and remove adapter (6) from the cylinder head.6. Remove gasket (7) and seal (5) from adapter (6). The following steps are for installation of the fuel injection nozzles and adapters.7. Use tool (E) to clean the bore in adapter (6). Use an open end wrench or tap driver to turn tool (E).8. Inspect seal (5) for damage or wear. Replace the seal if necessary.9. Put washer (7) and seal (5) in position on adapter (6).10. Put liquid soap in the bores of the cylinder head and on seals (5) in the adapters.11. Put 5P3931 Anti-Seize Compound on the threads of adapter (6), and install the adapter in the cylinder head assembly.12. Use tool (D), and tighten the adapter to a torque of 205 14 N m (150 10 lb.ft.).
Make sure the correct compression seal washer (4) is used when the nozzle assembly is installed in the adapter. Only copper washers are to be used with this adapter.
13. Install compression seal washer (4), and use tool (F) to install carbon dam seal (8) on the fuel injection nozzle.14. Put fuel injection nozzle (3) in position in the adapter, and install retainer (2).15. Use tool (B) to tighten retainer (2) to a torque of 48 7 N m (35 5 lb.ft.).16. Install fuel line (1). Tighten the nuts on the fuel line with tooling (A) to a torque of 40 7 N m (30 5 lb.ft.).End By:a. install valve covers
*Part of the 8S2245 Cleaning Tool GroupStart By:a. remove valve covers 1. Use tooling (A), and disconnect fuel line (1) at each end. Remove the fuel line from the engine. 2. Use tool (B), and remove retainer (2) from the adapter.3. Remove the fuel injection nozzles with tooling (C) as follows:a. Install the 6V6983 Adapter and the 8T3199 Screw into nozzle assembly (3).b. Install the 8T3198 Tube over the 8T3199 Screw.c. Use the 1B4206 Nut on the 8T3199 Screw.d. Use the 1B4206 Nut on the 8T3199 Screw to pull the fuel injection nozzle from the adapter.4. Remove compression seal (4) and carbon dam seal (8) from fuel injection nozzle (3).5. Use tool (D), and remove adapter (6) from the cylinder head.6. Remove gasket (7) and seal (5) from adapter (6). The following steps are for installation of the fuel injection nozzles and adapters.7. Use tool (E) to clean the bore in adapter (6). Use an open end wrench or tap driver to turn tool (E).8. Inspect seal (5) for damage or wear. Replace the seal if necessary.9. Put washer (7) and seal (5) in position on adapter (6).10. Put liquid soap in the bores of the cylinder head and on seals (5) in the adapters.11. Put 5P3931 Anti-Seize Compound on the threads of adapter (6), and install the adapter in the cylinder head assembly.12. Use tool (D), and tighten the adapter to a torque of 205 14 N m (150 10 lb.ft.).
Make sure the correct compression seal washer (4) is used when the nozzle assembly is installed in the adapter. Only copper washers are to be used with this adapter.
13. Install compression seal washer (4), and use tool (F) to install carbon dam seal (8) on the fuel injection nozzle.14. Put fuel injection nozzle (3) in position in the adapter, and install retainer (2).15. Use tool (B) to tighten retainer (2) to a torque of 48 7 N m (35 5 lb.ft.).16. Install fuel line (1). Tighten the nuts on the fuel line with tooling (A) to a torque of 40 7 N m (30 5 lb.ft.).End By:a. install valve covers
Caterpillar parts catalog:
Parts control Caterpillar catalog:
140G, 3126B, 3412E, 3606, 3608, 3612, 3616, 621B, 627F, 631D, 637D, 657E, 725, 730, 735, 740, 770, 772, 815B, 824C, 844K, 854K, 938H, 950H, 953D, 962H, 963D, 966H, 972H, 973D, 980C, 980G, 980H, 990K, ...
2860444
CONTROL GP-TRANSMISSION HYD
C9, TH31-E61
C9, TH31-E61
3722910
CONTROL GP-UNPROGRAMMED
12M 2, 12M 3, 140M 2, 160M 2, 3516C, 390F L, 627H, 627K, 725C, 770G, 770G OEM, 772G, 772G OEM, 824K, 825K, 826K, 834K, 836K, 988K, C175-16, C9, D6T LGP, D6T XL, D7E, D7E LGP, D9T, TH31-E61
12M 2, 12M 3, 140M 2, 160M 2, 3516C, 390F L, 627H, 627K, 725C, 770G, 770G OEM, 772G, 772G OEM, 824K, 825K, 826K, 834K, 836K, 988K, C175-16, C9, D6T LGP, D6T XL, D7E, D7E LGP, D9T, TH31-E61
120K, 120K 2, 12K, 140K, 140K 2, 160K, 725, 730, 962H, 966H, 972H, 980H, C15, C9, CX31-C9I, D6R III, TH31-E61, TH35-C13I, TH35-C15I
3024, 3116, 3126, 3126B, 3126E, 3176B, 3406E, C-10, C-12, C-15, C-16, C-9, C11, C13, C15, C7, C9, CX28, CX31, CX35, DEUCE, TH31-E61, TH35-C13T, TH35-C15T
2267475
CONTROL GP-ENGINE ELECTRONIC
365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH, 586C, 627G, 637D, 637E, 637G, C7, C9, TH31-E61
365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH, 586C, 627G, 637D, 637E, 637G, C7, C9, TH31-E61
2864452
CONTROL GP-ENGINE ELECTRONIC
C13, C15, C7, C9, TH35-C13T, TH35-C15T
C13, C15, C7, C9, TH35-C13T, TH35-C15T
C-9, C13, C15, C7, C9
2864449
CONTROL GP-MACHINE
C9, TH31-E61
C9, TH31-E61
2808906
CONTROL GP-ELECTRONIC
C13, C15, TH35-C15T
C13, C15, TH35-C15T
2864451
CONTROL GP-ELECTRONIC
C13, C15, TH35-C15T
C13, C15, TH35-C15T
C13, C15, TH35-C13T, TH35-C15T
C15, C18
345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 651B, 657E, 657G, 770, 772, 950H, 962H, AP-755, C7, C9, IT62H, PM-200, PM-201, W345C MH
2267475
CONTROL GP-ENGINE ELECTRONIC
365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH, 586C, 627G, 637D, 637E, 637G, C7, C9, TH31-E61
365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH, 586C, 627G, 637D, 637E, 637G, C7, C9, TH31-E61
324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 390D...
2943323
CONTROL GP-UNPRGMED MONITOR
966F II, AP-600D, AP-655D, AS4251C, AS4252C, C11, C13, C15, C18, C7, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I, CX35-C18I, CX35-P800, TH35-C11I
966F II, AP-600D, AP-655D, AS4251C, AS4252C, C11, C13, C15, C18, C7, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I, CX35-C18I, CX35-P800, TH35-C11I
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 950H, 962H, AD30, AD45B, AD55, C11, C13, C15, C18, C7, C9, CX31-C13I, CX31-C15I, CX31-C9I, CX35-P800, I...
C13, C15, TH35-C13T, TH35-C15T
2864451
CONTROL GP-ELECTRONIC
C13, C15, TH35-C15T
C13, C15, TH35-C15T
2808906
CONTROL GP-ELECTRONIC
C13, C15, TH35-C15T
C13, C15, TH35-C15T
2864449
CONTROL GP-MACHINE
C9, TH31-E61
C9, TH31-E61
C-9, C13, C15, C7, C9
2864452
CONTROL GP-ENGINE ELECTRONIC
C13, C15, C7, C9, TH35-C13T, TH35-C15T
C13, C15, C7, C9, TH35-C13T, TH35-C15T