CONTROL GP-UNPROGRAMMED 3742640 - Caterpillar

Installation of the Lubrication Lines Group for the Right Hand Lever Assembly
Illustration 23 g00860329
Right side view of the lubrication lines for the right lever assembly The following injectors supply grease to the following points: (1) Rear bucket link pin (2) Tilt cylinder (3) Closed (4) Closed (5) Front bucket link pin (6) Bellcrank (7) Closed (8) Closed
Mount a 3B-6552 Elbow (34) onto the number six injector of the 171-8873 Lube Distribution Valve (41). Connect the end of a 172-0983 Hose As (30) without the swivel onto the 3B-6552 Elbow (34) .
Connect the end of the 172-0983 Hose As (30) with a swivel onto the bellcrank.
Mount a 8L-5008 Pipe Elbow (36) onto the number three injector of the 171-8873 Lube Distribution Valve (41). Connect the end of a 172-0982 Hose As (29) without the swivel onto the 8L-5008 Pipe Elbow (36) .
Mount a 6K-6967 Pipe Adapter (35) and a 3B-6552 Elbow (34) onto the tilt cylinder. Connect the end of the 172-0982 Hose As (29) with a swivel onto the 3B-6552 Elbow (34) .
Use the following hardware to secure the 172-0982 Hose As (29) :
Three 4D-7794 Clips (13)
Three 8T-4121 Hard Washers (20)
Three 8T-4137 Bolts (23)
Mount a 8L-5008 Pipe Elbow (36) onto the number five injector of the 171-8873 Lube Distribution Valve (41). Connect the end of a 172-0984 Hose As (40) without the swivel onto the 8L-5008 Pipe Elbow (36) .
Mount a 6K-6967 Pipe Adapter (35) and a 3B-6552 Elbow (34) onto the bucket link. Connect the end of the 172-0984 Hose As (40) with the swivel and the hose guard onto the 3B-6552 Elbow (34) .
Mount a 8L-5008 Pipe Elbow (36) onto the number one injector of the 171-8873 Lube Distribution Valve (41). Connect the end of a 172-0985 Hose As (31) without the swivel onto the 8L-5008 Pipe Elbow (36) .
Mount a 6K-6967 Pipe Adapter (35) and a 8L-5008 Pipe Elbow (36) onto the rear link pin. Connect the end of the 172-0985 Hose As (31) with the swivel and the hose guard onto the 8L-5008 Pipe Elbow (36) .
Use the following hardware to secure the 172-0985 Hose As (31) and the 172-0984 Hose As (40) :
One 4K-8864 Clip (15)
One 8T-4121 Hard Washers (20)
One 8T-4137 Bolt (23)
Use the following hardware to install the 174-8214 Guard As (6) :
Four 8T-4223 Hard Washers (26)
Four 8T-4956 Bolts (27)
Use the following hardware to mount a 186-1624 Guard (7) and a 171-8861 Bracket (5) to the bucket link:
Two 130-8433 Grommets (12)
Two 6V-4356 Clips (16)
Two 6V-4357 Clips (17)
Four 8T-4121 Hard Washers (20)
Two 8T-4133 Nuts (21)
One 8T-4186 Bolt (24)
One 8T-4196 Bolt (25)
Use the following hardware to secure 172-0985 Hose As (31)