CONTROL GP-ELECTRIC HAND 3995802 - Caterpillar

Illustration 60 g00748572
Mount the remote module (tachometer or quad gauge).Note: The length of the wires between the J2 remote module connector and the remote module should NOT exceed 6 m (20 ft).
Remove the sealing plugs from the J2 remote module connector.
Connect a wire from terminal 1 of the J2 remote module connector to terminal 1 of the 155-2274 Connecting Plug Kit (Remote Tachometer) or terminal 1 of the 155-2265 Connecting Plug Kit (Remote Quad Gauge) .
Continue connecting wires between the two connectors at terminals 2, 3, 4, and 5.
Connect the circuit for the backlight. Refer to the Illustration 60.
Install the sealing plugs that were removed in Step 1 into any open cavities in the J2 remote module connector and the connector at the remote module.
Connect the remote module to the harness.Connecting Multiple EMS Displays
Illustration 61 g00750946
Additional EMS displays may be installed in a multiple installation. Use the Illustration 61 in order to connect each individual station. For additional stations, make multiple connections to the CAT Data Link. Keep the total combined cable length as short as possible. The preferred method is through terminal strips.Note: Use 143-5018 Cable (Twisted Pair) for all connections to the CAT data link. The total length of the cable should NOT exceed 30 m (100 ft). Reference Materials
For additional information, use the following publications:
Electrical Schematic, SENR9590, "3126B Industrial Engines"
Electrical Schematic, SENR9592, "C-9 Industrial Engines"
Electrical Schematic, SENR9575, "C-10, C-12, C-15, and C-16 Industrial Engines"
Operation and Maintenance Manual, SEBU7457, "3126B Industrial Engines"
Operation and Maintenance Manual, SEBU7502, "C-9 Industrial Engines"
Operation and Maintenance Manual, SEBU7385, "C-10 and C-12 Industrial Engines"
Operation and Maintenance Manual, SEBU7517, "C-15 and C-16 Industrial Engines"
Troubleshooting, SENR9591, "3126B Industrial Engines"
Troubleshooting, SENR9593, "C-9 Industrial Engines"
Troubleshooting, SENR9576, "C-10, C-12, C-15, and C-16 Industrial Engines"
Pocket Guide, SEBD0402, "Guidelines for Routing and Installing Wire Harness Assemblies"
Special Publication, NEHS0685, "Caterpillar Electronic Technician (Cat ET)"