3P7003 CONTROL GP-WINCH HYDRAULIC Caterpillar parts
528
Rating:
Alternative (cross code) number:
CA3P7003
3P-7003
3P7003
CA3P7003
3P-7003
3P7003
Weight: 21 pounds 9 kg.
WHEEL SKIDDER, WINCH,
Compatible equipment models: 3P7003:
Number on catalog scheme:
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar SIS
528 WINCH 67V00001-UP »
3P-7003
CONTROL GP-WINCH HYDRAULIC
528 SKIDDER 51S00737-UP (MACHINE) POWERED BY 3306 ENGINE »
3P-7003
CONTROL GP-WINCH HYDRAULIC
528 SKIDDER / POWER SHIFT / 96C00001-UP (MACHINE) POWERED BY 3306 ENGINE »
3P-7003
CONTROL GP-WINCH HYDRAULIC
528 GRAPPLE SKIDDER / POWER SHIFT / 97C00001-UP (MACHINE) POWERED BY 3306 ENGINE »
3P-7003
CONTROL GP-WINCH HYDRAULIC
Caterpillar parts catalog:
Information:
Illustration 1 g01571118
Illustration 2 g01571123Note: The sealing surfaces of the oil pan shall be free of oil, debris, gasket material that is protruding, or any other sealant. The oil pan must be assembled and tightened to the cylinder block within five minutes of applying sealant.Use the following procedure to install the oil pan:
Apply 4C-9612 Silicone Sealant to a bead of 5 mm (0.2 inch) at four places (3) on the sealing surface of the oil pan. The sealing surfaces are the following areas:
Connecting joint of the front housing and the front of the cylinder block
Connecting joint of the flywheel housing and the rear of the cylinder block
Tighten the four bolts (1) to 31 3 N m (23 2 lb ft).
Start with bolt (2) and tighten all the bolts in a counterclockwise sequence to 31 3 N m (23 2 lb ft).
Again start with bolt (2) and tighten all the bolts in a counterclockwise sequence to 31 3 N m (23 2 lb ft).
Parts control Caterpillar catalog:
1P0568
CONTROL GP-TRANSMISSION HYD
528, 528B
528, 528B
8K6523
CONTROL GP-BULLDOZER
528, 528B, 530B
528, 528B, 530B
2P2436
CONTROL GP-GOVERNOR
583K, D8K
583K, D8K