CONTROL GP-AIR & TEMPERATURE 4375351 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     155-3597     Wheel Chock     4    
B     9U-7536     Lift Stand     2    
4C-5809 Electric Hydraulic Pump Gp     1    
Illustration 1 g01142730
Attach a suitable lifting device to tire and rim (5) and position tire and rim (5). The weight of tire and rim (5) is approximately 1134 kg (2500 lb). Install bolts (4). Tighten bolts (4) to a torque of 1000 125 N m (738 92 lb ft). Repeat for the opposite side.
Illustration 2 g01142706
Use Tooling (B) in order to lower the rear of the machine.
Illustration 3 g01142722
Remove the suitable blocking between rear axle (3) and frame assembly (2). Repeat for the opposite side.
Illustration 4 g01142639
Remove Tooling (A) from the front of front tires (1) and the back of front tires (1) .End By: Install the swingout ladder. Refer to Disassembly and Assembly, "Swingout Ladder - Install".