CONTROL GP-TRANSMISSION HYD 4433876 - Caterpillar

Table 1
Service Tools    
Part Number    Part    
    Caterpillar Electronic Technician (Cat ET)    
146-4080
9U-7330     Digital Multimeter    
8T-3224     Needle Tip Group    
7X-1710     Multimeter Probe Group    
8T-8726     Adapter Cable Assembly    
6V-3000     Connector Repair Kit (Sure Seal)    
9U-7246     Connector Repair Kit (Deutsch DT)    
4C-3406     Connector Repair Kit (Deutsch)    
4C-8195     Control Service Tool (Switch Box)    
276-7273     Sensor Test Box (1)    
( 1 ) A instrument that is used in order to monitor the sensors of the cylinder
Illustration 1 g00429878
4C-8195 Control Service Tool (1) Mode switch. (2) Clear switch. (3) Scroll switch.The 4C-8195 Control Service Tool is helpful for the service person to make the proper electrical connections at the Caterpillar Monitoring System service connector during troubleshooting. Three connectors are wired in parallel so that the service tool is usable on the different types of machine harnesses.Actuating the mode switch scrolls through the display modes of the Caterpillar Monitoring System. Actuate the scroll switch in order to scroll through the display while you are in the service mode or while you are in the numeric readout mode. Actuate the clear switch while you are in the service mode and you will clear the fault that is being continuously shown. All the values that are extreme will be cleared when you actuate the clear switch. The values will be cleared in the tattletale mode.
Illustration 2 g01164706
Connections for the Caterpillar Electronic Technician (Cat ET)The components that are needed in order to use the Cat ET in order to determine diagnostic codes are listed: (4) An IBM-COMPATIBLE personal computer with an installed current version of Cat ET software (5) 139-4166 Data Link Cable or 7X-1570 Data Link Cable (6) 7X-1425 Cable and 4C-6805 Adapter (7) Special Publication, JEBD3003, Special Publication, JERD2124, Special Publication, JERD2129 ; Cat ET software (8) 7X-1700 Communication Adapter Tool with Special Publication, NEXG4323, "Communications Adapter Software"
Illustration 3 g01164713
Connections for the Communication Adapter II and the Cat ETThe components that are needed in order to use the Communication Adapter II and the Cat ET in order to determine the diagnostic codes that are listed (9) Cable (10) 171-4400 Communication Adapter ii (11) Service diagnostic cable. (12) Current version of Cat ET software and an IBM-COMPATIBLE personal computerReferenceRefer to Special Publication, NEHS0758, "Communications Adapter II User's Manual Contains Software".Note: Cat ET is a software program that can be used on an IBM compatible personal computer. In order to use the Cat ET, order the following materials: Special Publication, JERD2124, "ET Single Use Program License", Special Publication, JEHP1026, "Information and Requirements Sheet", 7X-1425 Data Link Cable and the Data Subscription and Special Publication, JERD2142, "Data Subscription". The Special Publication, JEHP1026, "Information and Requirements Sheet" lists the required hardware and the features of the ET.The Cat ET is