CONTROL GP-TRANSMISSION HYD 4458911 - Caterpillar

Product Identification Number (PIN)
Illustration 1 g00791611
The PIN plate is located on the frame in front of the front left tire.
Model Number____________________
Machine PIN____________________Optional Plate for the European Union
Illustration 2 g00490771
If the machine is equipped with the optional plate for the European Union, the plate will be located next to the door on the left side of the cab.If the machine is equipped for the European Union, this plate will be attached. This plate will contain the following information.PIN____________________Model____________________Power (kW)____________________Weight (kg)____________________Note: If the Year Of Manufacture is not located on the CE Plate, this information will be located on a plate inside the cab.Serial Number Plates (SN)
Illustration 3 g00524671
Service Information Number
(SIN)____________________
Illustration 4 g00524672
Transmission Serial Number____________________
Illustration 5 g00524673
Engine Serial Number____________________
Illustration 6 g00794684
Dump Body Serial Number____________________The following information is stamped on the component.Torque Converter Serial Number____________________Certification
ROPS/FOPS Plate
This certification plate is located outside the cab on the right side of the ROPS.
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
Illustration 7 g00100417
Earlier Machines
Illustration 8 g01125202
Later MachinesThis machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.Sound (If Equipped)
If equipped, this film is located on the right side of the cab behind the right door.
Illustration 9 g01015551
A typical example of this film is shown. Your machine may have a different value.If equipped, the certification film is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level LWA at the time of manufacture for the conditions that are specified in "2000/14/EC".