4502430 CONTROL GP-ELE Caterpillar parts
Rating:
Alternative (cross code) number:
CA4502430
450-2430
4502430
CA4502430
450-2430
4502430
Weight: 1 pounds 0 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
GEDORE 122004 Chain Pipe Wrench, American Pattern 3/4-4"
GEDORE High efficiency due to maximum-possible lever action || Tempered steel acc. to EN 10083 || With hardened exchangeable jaws, toothed on both sides || GEDORE stands for a universal, comprehensive offer of high-end tools, special tools. The GEDORE quality promise is based on 100 years of forging competence. || The closest attention is paid to every single detail of every single GEDORE tool: qualified staff, intelligent construction, first-class materials and modern production methods.
GEDORE High efficiency due to maximum-possible lever action || Tempered steel acc. to EN 10083 || With hardened exchangeable jaws, toothed on both sides || GEDORE stands for a universal, comprehensive offer of high-end tools, special tools. The GEDORE quality promise is based on 100 years of forging competence. || The closest attention is paid to every single detail of every single GEDORE tool: qualified staff, intelligent construction, first-class materials and modern production methods.
$345.78
08 Apr 2024
0.22[0.10] Pounds
DE: German Sanitary
GEDORE 122004 Chain Pipe Wrench, American Pattern 3/4-4"
GEDORE High efficiency due to maximum-possible lever action || Tempered steel acc. to EN 10083 || With hardened exchangeable jaws, toothed on both sides || GEDORE stands for a universal, comprehensive offer of high-end tools, special tools. The GEDORE quality promise is based on 100 years of forging competence. || The closest attention is paid to every single detail of every single GEDORE tool: qualified staff, intelligent construction, first-class materials and modern production methods.
GEDORE High efficiency due to maximum-possible lever action || Tempered steel acc. to EN 10083 || With hardened exchangeable jaws, toothed on both sides || GEDORE stands for a universal, comprehensive offer of high-end tools, special tools. The GEDORE quality promise is based on 100 years of forging competence. || The closest attention is paid to every single detail of every single GEDORE tool: qualified staff, intelligent construction, first-class materials and modern production methods.
$367.46
01 Mar 2024
0.22[0.10] pounds
DE: German Sanitary
GEDORE 122004 Chain Pipe Wrench, American Pattern 3/4-4"
GEDORE High efficiency due to maximum-possible lever action || Tempered steel acc. to EN 10083 || With hardened exchangeable jaws, toothed on both sides || GEDORE stands for a universal, comprehensive offer of high-end tools, special tools. The GEDORE quality promise is based on 100 years of forging competence. || The closest attention is paid to every single detail of every single GEDORE tool: qualified staff, intelligent construction, first-class materials and modern production methods.
GEDORE High efficiency due to maximum-possible lever action || Tempered steel acc. to EN 10083 || With hardened exchangeable jaws, toothed on both sides || GEDORE stands for a universal, comprehensive offer of high-end tools, special tools. The GEDORE quality promise is based on 100 years of forging competence. || The closest attention is paid to every single detail of every single GEDORE tool: qualified staff, intelligent construction, first-class materials and modern production methods.
This part in 6 request:
Show.
This information for suppliers only!
2025-07-29
2022-01-21
2021-01-13
2021-01-13
2020-10-14
2020-02-18
For full view, you need register
Information:
Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02704316
Ensure that cooler matrix (5) is clean, free from restriction, and free from damage. Ensure that spacer plate (7) is clean and free from damage. Replace any damaged components.
Position a new joint (6) onto spacer plate (7). Install cooler matrix (5) to the spacer plate.
Install bolts (4) finger tight. Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Studs
(M8 by 70 mm) 2
Clean the gasket surface of the cylinder block.
Illustration 2 g02721610
Illustration 3 g02704416
Tightening sequence for an engine oil cooler
Position a new gasket (3) (not shown) onto the assembly of engine oil cooler (2). Install bolts (1) to the serrated holes in the gasket. Note: Ensure that the bolts of different length are installed in the correct position.
Install Tooling (A) to the cylinder block.
Install the assembly of oil cooler (2) onto Tooling (A) . Ensure that the assembly of the oil cooler is correctly located into the recess of the cylinder block.
Tighten bolts (1) finger tight.
Remove Tooling (A).
Install remaining bolts (1) to assembly of engine oil cooler (2).
Tighten bolts (1) to a torque of 22 N m (195 lb in) in the sequence that is shown in Illustration 3.
Install the oil filter base. Refer to Disassembly and Assembly, "Oil Filter Base - Remove and Install" for the correct procedure.
Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Check the level of the engine lubricating oil. Refer to Operation and Maintenance Manual, "Engine Oil Level - Check" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02704316
Ensure that cooler matrix (5) is clean, free from restriction, and free from damage. Ensure that spacer plate (7) is clean and free from damage. Replace any damaged components.
Position a new joint (6) onto spacer plate (7). Install cooler matrix (5) to the spacer plate.
Install bolts (4) finger tight. Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Studs
(M8 by 70 mm) 2
Clean the gasket surface of the cylinder block.
Illustration 2 g02721610
Illustration 3 g02704416
Tightening sequence for an engine oil cooler
Position a new gasket (3) (not shown) onto the assembly of engine oil cooler (2). Install bolts (1) to the serrated holes in the gasket. Note: Ensure that the bolts of different length are installed in the correct position.
Install Tooling (A) to the cylinder block.
Install the assembly of oil cooler (2) onto Tooling (A) . Ensure that the assembly of the oil cooler is correctly located into the recess of the cylinder block.
Tighten bolts (1) finger tight.
Remove Tooling (A).
Install remaining bolts (1) to assembly of engine oil cooler (2).
Tighten bolts (1) to a torque of 22 N m (195 lb in) in the sequence that is shown in Illustration 3.
Install the oil filter base. Refer to Disassembly and Assembly, "Oil Filter Base - Remove and Install" for the correct procedure.
Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Check the level of the engine lubricating oil. Refer to Operation and Maintenance Manual, "Engine Oil Level - Check" for the correct procedure.
Parts control Caterpillar catalog:
4500317
CONTROL
Caterpillar
Caterpillar
4500316
CONTROL
Caterpillar
Caterpillar
4500312
CONTROL
Caterpillar
Caterpillar
4499879
CONTROL AR-AUX
Caterpillar
Caterpillar
4499878
CONTROL AR-AUX
Caterpillar
Caterpillar
4491484
CONTROL AR
Caterpillar
Caterpillar
4517885
CONTROL AR-
Caterpillar
Caterpillar
4516235
CONTROL AR-
Caterpillar
Caterpillar
4516234
CONTROL AR-AUX
Caterpillar
Caterpillar
4515383
CONTROL-FLOW
Caterpillar
Caterpillar
4512060
CONTROL AS-
Caterpillar
Caterpillar
4504185
CONTROL AR
Caterpillar
Caterpillar