CONTROL GP-JOYSTICK 4605346 - Caterpillar

Illustration 1 g02605857
Illustration 2 g02605856
Table 1
Specification for 220-6060 Turbocharger Gp, 260-3602 Turbocharger Gp, and 246-6624 Turbocharger Gp    
Item     Qty     Part     Specification Description    
1     1     9N-2038 Turbine Clamp As     Use the following procedure to tighten the turbine clamp assembly:
1. Tighten to
18 1.6 N m (159 14 lb in).
2. Loosen to one to two full turns.
3. Again, tighten to
13.6 1.2 N m (120 10 lb in).    
2     -     -     Opening pressure of the wastegate is
137.9 3.4 kPa (20.0 0.5 psi).    
3     -     268-2960 Clamp As     Torque to
13.6 1.2 N m (120 10 lb in)    
4     4     375-2467 Flange Locknut     Before assembly, apply Loctite C5A copper anti-size to the threads of the locknuts.    
Torque to
70 5 N m (52 4 lb ft).