4901012 CONTROL GP-PEDAL Caterpillar parts
Rating:
Alternative (cross code) number:
CA4901012
490-1012
4901012
CA4901012
490-1012
4901012
Weight: 3 pounds 1 kg.
You can buy:
US$550.00
28 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
IMIFAFTAbT 561-7001 490-1012 Electronic Control Pedal Valve for Caterpillar CAT E320D E323D E320GC E323G E330GC E336GC E345GC E349GC
IMIFAFTAbT Part Name:Electronic Control Pedal Valve 561-7001 490-1012 || Part Number:561-7001 490-1012 || APPlication: Compatible with Caterpillar CAT E320D E323D E320GC E323G E330GC E336GC E345GC E349GC || If you are not sure if the product is suitable please leave us a message and send us your original || product picture and part number and we will send the correct part after confirmation
IMIFAFTAbT Part Name:Electronic Control Pedal Valve 561-7001 490-1012 || Part Number:561-7001 490-1012 || APPlication: Compatible with Caterpillar CAT E320D E323D E320GC E323G E330GC E336GC E345GC E349GC || If you are not sure if the product is suitable please leave us a message and send us your original || product picture and part number and we will send the correct part after confirmation
561-7001 490-1012 Electronic Control Pedal Valve Compatible with Cat E320D E323D E320GC E323G E330GC E336GC E345GC E349GC
DJCXYSM Product Name:Electronic Control Pedal Valve || Part Number:561-7001 490-1012 || Application:Compatible with Cat E320D E323D E320GC E323G E330GC E336GC E345GC E349GC || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || Tip: If you have any questions before or after sale please contact us in time. We'll help you out as soon as possible.
DJCXYSM Product Name:Electronic Control Pedal Valve || Part Number:561-7001 490-1012 || Application:Compatible with Cat E320D E323D E320GC E323G E330GC E336GC E345GC E349GC || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || Tip: If you have any questions before or after sale please contact us in time. We'll help you out as soon as possible.
1pc 561-7001 490-1012 Foot Control Pedal Valve 5617001 for Excavator 312GC 315GC 320GC 323GC 330GC 336GC 345GC 349GC
ZMDRXQOJ Solenoids || 1pc 561-7001 490-1012 Foot Control Pedal Valve 5617001 for Excavator 312GC 315GC 320GC 323GC 330GC 336GC 345GC 349GC
ZMDRXQOJ Solenoids || 1pc 561-7001 490-1012 Foot Control Pedal Valve 5617001 for Excavator 312GC 315GC 320GC 323GC 330GC 336GC 345GC 349GC
Number on catalog scheme:
11
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6238 Guide Bolt 2
B 8T-3052 Degree Wheel 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Thoroughly clean the top of the cylinder block and the bottom of the cylinder head. Ensure that there is no debris in the cylinder bores, the coolant passages, and the lubricant passages.Note: Thoroughly clean the hole in the cylinder head for the gas that is ventilated from the crankcase. Ensure that the hole is not restricted by debris and/or oil deposits.
Illustration 1 g01253350
Install the cylinder head gasket on the dowels (13) on top of the cylinder block. Note: Do not use any sealant or compound on the cylinder head gasket.
Install Tooling (A) in the cylinder block.
Use a suitable lifting device to install the cylinder head. The weight of the cylinder head is approximately 57 kg (126 lb). Note: Ensure that the cylinder head is positioned on dowels (13). Take care not to damage the machined surfaces of the cylinder head during installation.
Remove Tooling (A). Note: New bolts (12) should be used to secure cylinder head (11).
Apply clean engine oil to the threads and the shoulder of bolts (12) that secure the cylinder head (11) before installation.
Illustration 2 g03372792
Install bolts (12) in cylinder head (11). Note: The short bolts (12) are installed in holes that are marked 2, 5, 6, 7, 8, 9, and 10.Note: Long bolts (12) are installed in holes that are marked 1, 3, and 4.
Tighten bolts (12) in numerical order to a torque of 50 N m (37 lb ft). Refer to Illustration 2.
Tighten bolts (12) in numerical order to a torque of 100 N m (74 lb ft). Refer to Illustration 2.
Illustration 3 g01151296
Use Tooling (B) to achieve the correct final torque. Note: If the Tooling (B) is not available, place an index mark on each bolt (12).
Tighten bolts (12) in numerical order. Refer to Illustration 2.
Turn short bolts (12) (2, 5, 6, 7, 8, 9, and 10) for an additional 225 degrees.
Turn long bolts (12) (1, 3, and 4) for an additional 270 degrees.
Illustration 4 g01253283
Install new O-ring seals on tube assembly (9). Install tube assembly (9).
Illustration 5 g01253275
Install bolts (8) and bolts (6). Connect harness assembly (5). Connect hose (7) and hose (4).
Illustration 6 g01253262
position air cleaner assembly (1). Install bolts (2). Tighten clamp (3).
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change". End By:
Install the glow plugs. Refer to Disassembly and Assembly , "Glow Plugs - Remove and Install".
Install the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Install the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold - Remove and Install".
Install the fuel injection Nozzles. Refer to Disassembly and Assembly , "Fuel Injection Nozzles - Install".
Install the fuel priming pump. Refer to Disassembly and Assembly , "Fuel Priming Pump and Fuel Filter Base - Remove and Install".
Install the fan guard. Refer to Disassembly and Assembly
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6238 Guide Bolt 2
B 8T-3052 Degree Wheel 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Thoroughly clean the top of the cylinder block and the bottom of the cylinder head. Ensure that there is no debris in the cylinder bores, the coolant passages, and the lubricant passages.Note: Thoroughly clean the hole in the cylinder head for the gas that is ventilated from the crankcase. Ensure that the hole is not restricted by debris and/or oil deposits.
Illustration 1 g01253350
Install the cylinder head gasket on the dowels (13) on top of the cylinder block. Note: Do not use any sealant or compound on the cylinder head gasket.
Install Tooling (A) in the cylinder block.
Use a suitable lifting device to install the cylinder head. The weight of the cylinder head is approximately 57 kg (126 lb). Note: Ensure that the cylinder head is positioned on dowels (13). Take care not to damage the machined surfaces of the cylinder head during installation.
Remove Tooling (A). Note: New bolts (12) should be used to secure cylinder head (11).
Apply clean engine oil to the threads and the shoulder of bolts (12) that secure the cylinder head (11) before installation.
Illustration 2 g03372792
Install bolts (12) in cylinder head (11). Note: The short bolts (12) are installed in holes that are marked 2, 5, 6, 7, 8, 9, and 10.Note: Long bolts (12) are installed in holes that are marked 1, 3, and 4.
Tighten bolts (12) in numerical order to a torque of 50 N m (37 lb ft). Refer to Illustration 2.
Tighten bolts (12) in numerical order to a torque of 100 N m (74 lb ft). Refer to Illustration 2.
Illustration 3 g01151296
Use Tooling (B) to achieve the correct final torque. Note: If the Tooling (B) is not available, place an index mark on each bolt (12).
Tighten bolts (12) in numerical order. Refer to Illustration 2.
Turn short bolts (12) (2, 5, 6, 7, 8, 9, and 10) for an additional 225 degrees.
Turn long bolts (12) (1, 3, and 4) for an additional 270 degrees.
Illustration 4 g01253283
Install new O-ring seals on tube assembly (9). Install tube assembly (9).
Illustration 5 g01253275
Install bolts (8) and bolts (6). Connect harness assembly (5). Connect hose (7) and hose (4).
Illustration 6 g01253262
position air cleaner assembly (1). Install bolts (2). Tighten clamp (3).
Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change". End By:
Install the glow plugs. Refer to Disassembly and Assembly , "Glow Plugs - Remove and Install".
Install the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Install the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold - Remove and Install".
Install the fuel injection Nozzles. Refer to Disassembly and Assembly , "Fuel Injection Nozzles - Install".
Install the fuel priming pump. Refer to Disassembly and Assembly , "Fuel Priming Pump and Fuel Filter Base - Remove and Install".
Install the fan guard. Refer to Disassembly and Assembly
Caterpillar parts catalog:
Parts control Caterpillar catalog:
Caterpillar
4886820
CONTROL & MTG GP-COMMUNICATION
Caterpillar
Caterpillar
4886819
CONTROL & MTG GP-COMMUNICATION
Caterpillar
Caterpillar
4886816
CONTROL & MTG GP-MACHINE
Caterpillar
Caterpillar
4884878
CONTROL GP-ENGINE ELECTRONIC
Caterpillar
Caterpillar
4884876
CONTROL GP-ENGINE ELECTRONIC
Caterpillar
Caterpillar
Caterpillar
4916842
CONTROL GP-UNPROGRAMMED
Caterpillar
Caterpillar
4916738
CONTROL GP-ELECTRONIC
Caterpillar
Caterpillar
4913721
CONTROL GP-HANDLE
Caterpillar
Caterpillar
4910880
CONTROL GP-SCREED
Caterpillar
Caterpillar
4910879
CONTROL GP-SCREED
Caterpillar
Caterpillar