CONTROL AS 5118117 - Caterpillar

Illustration 29 g03725566
Insert bracket (26) to the free end of rod (25). Orient the flange on the bracket as shown in Illustration 29. Secure using one hard washer (6) and one nut (3). Tighten the nut to 15 3 N m (11 2 lb ft).Machine Configuration
The 422-3362 Self Level Kit is a premium feature that must be configured using the Caterpillar Electronic Technician (CAT ET).
Connect the CAT ET Tool to the machine. Turn the start key to the ON position. Do not start the engine.
Start the CAT ET software and select the machine "ECM".
Illustration 30 g03687424
Illustration 31 g03687425
From the menu select "Service", "Configuration", "Self Level". Alternatively, press F5 or click on the "Configuration" icon on the menu bar. Refer to Illustration 30 and 31.
Illustration 32 g03687426
Notice that the Self Level features are not installed. In the configuration screen, double click on the "Work Tool Self Level System Installation Status" link, as shown above.
In the pop-up window, change the New Value field from