5201347 CONTROL GP-HANDLE Caterpillar parts
Rating:
Alternative (cross code) number:
CA5201347
520-1347
5201347
CA5201347
520-1347
5201347
Weight: 3 pounds 1 kg.
You can buy:
US$1,259.99
14 Jul 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Controller Joystick 520-1347 5201347 Compatible for CAT C18 Engine 336F LN XE 390F 390FL 336FLXE 352F 374F 336ELH 336ELNH 349FLXE 336FLNXE 352FXEVG 336FXE 374FL 336EH EXCAVATOR
DJCXYSM Product Name:Controller Joystick || Part Number:520-1347 5201347 || Application: Compatible for CAT C18 Engine 336F LN XE 390F 390FL 336FLXE 352F 374F 336ELH 336ELNH 349FLXE 336FLNXE 352FXEVG 336FXE 374FL 336EH EXCAVATOR || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || TIP: If you cannot find the required product part number, please consult us and we will reply as soon as possible.
DJCXYSM Product Name:Controller Joystick || Part Number:520-1347 5201347 || Application: Compatible for CAT C18 Engine 336F LN XE 390F 390FL 336FLXE 352F 374F 336ELH 336ELNH 349FLXE 336FLNXE 352FXEVG 336FXE 374FL 336EH EXCAVATOR || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || TIP: If you cannot find the required product part number, please consult us and we will reply as soon as possible.
HIRINTOL 520-1347 5201347 Original Control Handle Joystick Controller for Caterpillar 336E 336F 349F 352F 374F 390F MH3295 Excavator
HIRINTOL ????Replace Part Number: 520-1347, 5201347 || ????Compatible Model: for Caterpillar Models 336E 336F 349F 352F 374F 390F MH3295 || ????Perfect fit: Every part is manufactured to Original specifications for perfect fit and performance. || ????Sturdy and durable: Made of high-quality materials, with high wear resistance and high temperature resistance. || ????Easy to install: Easy to maintain and replace, can meet the needs of vehicle after-sales maintenance.
HIRINTOL ????Replace Part Number: 520-1347, 5201347 || ????Compatible Model: for Caterpillar Models 336E 336F 349F 352F 374F 390F MH3295 || ????Perfect fit: Every part is manufactured to Original specifications for perfect fit and performance. || ????Sturdy and durable: Made of high-quality materials, with high wear resistance and high temperature resistance. || ????Easy to install: Easy to maintain and replace, can meet the needs of vehicle after-sales maintenance.
ZGZJYBL NEW Electrical Joystick Pilot Valve Controller for Caterpillar E336E E336F E352F E374F E390F Excavator 520-1347 5201347
ZGZJYBL Item Name:Joystick Pilot Valve Controller || Item Number:520-1347 5201347 || Application:for Caterpillar E336E E336F E352F E374F E390F Excavator || Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. || Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
ZGZJYBL Item Name:Joystick Pilot Valve Controller || Item Number:520-1347 5201347 || Application:for Caterpillar E336E E336F E352F E374F E390F Excavator || Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. || Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
This part in 2 request:
Show.
This information for suppliers only!
2023-02-07
2023-02-07
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M10 by 100 mm 2 Start By:
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02227473
Typical example
Illustration 2 g02227474
Typical example
Remove bolts (3) from Position (X) from flywheel housing (1).
Install Tooling (A) into Position (X) on flywheel housing (1).
Install a suitable lifting device onto the flywheel housing in order to support the flywheel housing. The weight of the flywheel housing is approximately 40 kg (88 lb).
Remove bolts (2) and remaining bolts (3) from flywheel housing (1).
Use a suitable lifting device in order to remove flywheel housing (1) from the cylinder block.
Illustration 3 g01983533
Typical example
Remove dust seal (5).
If necessary, remove dowels (4) from the cylinder block. Installation Procedure (Standard Housing)
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M10 by 100 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the flywheel housing is clean and free from damage. If necessary, replace the flywheel housing.
Illustration 4 g01983535
Typical example
Inspect crankshaft rear seal (6) for leaks. If there are any oil leaks, replace the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove" and refer to Disassembly and Assembly, "Crankshaft Rear Seal - Install" for the correct procedure.
Clean the rear face of the cylinder block. If necessary, install dowels (4) to the cylinder block.
Install Tooling (A) to the cylinder block.
Install dust seal (5).
Illustration 5 g02227475
Typical example
Install a suitable lifting device onto the flywheel housing. The weight of the flywheel housing is approximately 40 kg (88 lb).
Use the lifting device to align flywheel housing (1) with Tooling (A). Install the flywheel housing to the cylinder block.
Install bolts (2) and bolts (3).
Remove Tooling (A). Install remaining bolts (3).
Illustration 6 g01984554
Identification of the bolt Grade.
When 8.8 Graded bolts are installed, follow Step 10.a through Step 10.b.
Tighten bolts (3) to a torque of 63 N m (46 lb ft).
Tighten bolts (2) to a torque of 78 N m (58 lb ft).
When 10.9 Graded bolts are installed follow Step 11.a through Step 11.b.
Tighten bolts (3) to a torque of 115 N m (85 lb ft).
Tighten bolts (2) to a torque of 190 N m (140 lb ft).
Check the alignment of flywheel housing (1) with the crankshaft. Refer to System Operation, Testing and Adjusting, "Flywheel Housing - Inspect" for more information. End By:
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install" for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M10 by 100 mm 2 Start By:
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02227473
Typical example
Illustration 2 g02227474
Typical example
Remove bolts (3) from Position (X) from flywheel housing (1).
Install Tooling (A) into Position (X) on flywheel housing (1).
Install a suitable lifting device onto the flywheel housing in order to support the flywheel housing. The weight of the flywheel housing is approximately 40 kg (88 lb).
Remove bolts (2) and remaining bolts (3) from flywheel housing (1).
Use a suitable lifting device in order to remove flywheel housing (1) from the cylinder block.
Illustration 3 g01983533
Typical example
Remove dust seal (5).
If necessary, remove dowels (4) from the cylinder block. Installation Procedure (Standard Housing)
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
M10 by 100 mm 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the flywheel housing is clean and free from damage. If necessary, replace the flywheel housing.
Illustration 4 g01983535
Typical example
Inspect crankshaft rear seal (6) for leaks. If there are any oil leaks, replace the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Remove" and refer to Disassembly and Assembly, "Crankshaft Rear Seal - Install" for the correct procedure.
Clean the rear face of the cylinder block. If necessary, install dowels (4) to the cylinder block.
Install Tooling (A) to the cylinder block.
Install dust seal (5).
Illustration 5 g02227475
Typical example
Install a suitable lifting device onto the flywheel housing. The weight of the flywheel housing is approximately 40 kg (88 lb).
Use the lifting device to align flywheel housing (1) with Tooling (A). Install the flywheel housing to the cylinder block.
Install bolts (2) and bolts (3).
Remove Tooling (A). Install remaining bolts (3).
Illustration 6 g01984554
Identification of the bolt Grade.
When 8.8 Graded bolts are installed, follow Step 10.a through Step 10.b.
Tighten bolts (3) to a torque of 63 N m (46 lb ft).
Tighten bolts (2) to a torque of 78 N m (58 lb ft).
When 10.9 Graded bolts are installed follow Step 11.a through Step 11.b.
Tighten bolts (3) to a torque of 115 N m (85 lb ft).
Tighten bolts (2) to a torque of 190 N m (140 lb ft).
Check the alignment of flywheel housing (1) with the crankshaft. Refer to System Operation, Testing and Adjusting, "Flywheel Housing - Inspect" for more information. End By:
Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install" for the correct procedure.
Cat SIS web machinery list:
Parts control Caterpillar catalog:
5153787
CONTROL GP-HANDLE
Caterpillar
Caterpillar
5153786
CONTROL GP-HANDLE
Caterpillar
Caterpillar
5127504
CONTROL GP-ELECTRONIC
Caterpillar
Caterpillar
5104967
CONTROL GP-ELECTRONIC
Caterpillar
Caterpillar
5096883
CONTROL & MTG GP-ELECTRONIC
Caterpillar
Caterpillar
5058955
CONTROL GP-MONITOR
Caterpillar
Caterpillar
5239359
CONTROL & MTG GP-COMMUNICATION
Caterpillar
Caterpillar
5239358
CONTROL & MTG GP-COMMUNICATION
Caterpillar
Caterpillar
5237805
CONTROL AR-BOOM
Caterpillar
Caterpillar
5229113
CONTROL GP-TRANSMISSION HYD
Caterpillar
Caterpillar
5218396
CONTROL & MTG GP-ENGINE ELEK
Caterpillar
Caterpillar
Caterpillar