CONTROL GP-ELECTRONIC 5210791 - Caterpillar

Illustration 2 g03150887
Table 2
Item Qty Part Specification Description
7 1 142-7072 Liner Seal Immediately before inserting liners, cover the liner bore surfaces and seals with 5P-3975 Rubber Lubricant
8 110-2220 Liner Seal Immediately before inserting liners, cover the liner bore surfaces and seals with 5P-3975 Rubber Lubricant
9 142-6217 O-Ring Seal Immediately before inserting liners, cover the liner bore surfaces and seals with 5P-3975 Rubber Lubricant
C - - The distance from the centerline of the crankshaft bearing bore to the top of the cylinder block is 419.10 mm (16.500 inch).
D - - The distance from the centerline of the crankshaft bearing bore to the bottom of the cylinder block is 165.10 mm (6.500 inch).
E - - Bore in cylinder block for main bearing is 129.891 0.013 mm (5.1138 0.0005 inch).
Illustration 3 g03150891
Right side of the engine
Table 3
Item Qty Part Specification Description
10 1 214-1728 Stud Before assembly, apply blue Loctite 540 to the pipe threads of stud.
11 3 6L-4428 Taperlock Stud Torque to 35 5 N m (26 4 lb ft).
F 4 4N-0683 Dowel Protrusion is 19.0 0.5 mm (0.75 0.02 inch).
Illustration 4 g03150892
Table 4
Item Qty Part Specification Description
12 1 225-5966 Sleeve Installation distance (G) is 1144.3 0.5 mm (45.05 0.02 inch).
13 1 4N-0685 Bushing Installation distance (H) is 211.3 0.5 mm (8.32 0.02 inch).
14 1 4N-6658 Bushing Installation distance (J) is 7.4 0.5 mm (0.29 0.02 inch).