CONTROL GP-GOVERNOR 5221791 - Caterpillar

Illustration 1 g01636841
(1) Adjustment lever for the lumbar support
(2) Adjustment lever for reclining the seat
(3) Lever for the seat cushion adjustment
(4) Seat fore and aft adjustment.
(5) Seat height adjustment
(6) Fore and aft seat and console adjustment
(7) Console adjustment
(8) Indicator
(9) Seat angle lever
(10) Armrest
(11) HeadrestThe lumbar support is located in the back of the seat. Turn knob (1) (if equipped) counterclockwise to increase the force of the lumbar support. In order to decrease the lumbar support, continue to turn the knob counterclockwise.Pull up lever (2) to change the angle of the seat. Hold the seat back in the desired position. Release the lever.Push in lever (3) to adjust the length of the cushion.To adjust the seat forward or backward, pull up lever (4) and hold the lever. Move the seat to the desired position. To lock the seat in the selected position, release the lever.Note: Before adjusting the seat forward or backward, make sure that the lever for the seat height adjustment (5) is in the downward position.Turn lever (5) to adjust the seat and the console to the desired height. In order to raise the seat height, pull the grip downward and rotate the grip with the plus sign outward. In order to lower the seat height, pull the grip downward and rotate the grip with the minus sign outward. Release grip to return to the original position.Pull lever (6) to adjust the seat and the console forward and backward.Use handle (7) to adjust the height of the console. When the lever is pulled forward, a gear is released. The operator can rotate the lever freely. Release the lever to return to the original position.Push the lever (9) to adjust the tilt angle of the seat.The operator can adjust the height of headrest (11). To adjust the headrest, hold the headrest with both hands. Move the headrest up and down. Release the headrest when the desired position is attained. The headrest will remain in the desired position.
Illustration 2 g01637296If your machine is equipped with an air ride suspension, the seat will be equipped with a lever (12). Pull up the lever to raise the height of the seat. Push down on the lever to lower the seat. If the adjustment is correct, indicator (8) will turn green. If the indicator shows red, further adjustment is required.
Illustration 3 g01636977
(13) Armrest adjustment knob
(14) Armrest height adjustmentThe height of the armrest can be adjusted. Squeeze lever (13) to adjust the height of the armrest. Move the armrest upward or move the armrest downward. Release the lever when the armrest is in the desired position.To adjust the angle of the armrest (10), operate dial (14). A dial is on the bottom of each armrest. Place the armrests in the upright position when you enter the machine or when you exit the machine.Heated Seat and Ventilated Seat (If Equipped)
Heat-induced burns can occur when some people use a seat heater. Do not use the seat heater if you have