CONTROL AS 5408265 - Caterpillar

Table 1
Sales Model     Adaptable From     Effective With    
Serial Number Serial Number    
D7E     S/N:TAN1-1337     S/N:TAN1338-UP    
D7E     S/N:TJA1-1194     S/N:TJA1195-UP    
Table 2
Required Part List    
Item     Qty     Part     Description    
1     1     7K-1181     Cable Strap    
2     1     8T-4121     Hard Washer    
3     1     8T-4137     Bolt    
4     1     217-4590     Bracket As    
5     1     352-3968     Clip    
Table 3
Referenced Part List    
Item     Qty     Part     Description    
6     1     387-1169     Engine Harness As    Rework Procedure
Illustration 1 g03811892
Tilt cab. Refer to the Operation and Maintenance Manual, SEBU8589 for more information.
Locate the engine harness (6) just below the implement pump and above the left rear engine mount on left side of flywheel housing. Inspect harness for damage and repair or replace if necessary. Refer to Illustration 1.
Illustration 2 g03811889
Preassemble bracket assembly (4), clip (5), bolt (3), and washer (2) .
Remove existing bolt and washer connecting generator to flywheel housing.
Slide bracket assembly between existing ladder clip and generator housing.
Reinstall bolt and washer.
Move up the engine harness (6) and secure to the ladder clip using cable strap (1). Refer to Illustration 2.