CONTROL GP-BRAKE 5G2859 - Caterpillar

Feature Variations
VIMSTM 3G is designed to operate on several different types of machines. All of the possible features of VIMS 3G are not needed on every type of machine. Configuration software is used to identify the type of machine and the available functions of VIMS 3G. Diagnostic information is stored in VIMS 3G for all system events and diagnostics. The information is stored even if the condition is not present at the time of troubleshooting. Types of Recorded Data
The occurrence of certain events, diagnostics, and machine conditions are recorded in the VIMS 3G onboard memory. The information is used to analyze machine problems and is organized into the following six categories:Event List - The event list is a record of stored events and diagnostics that have occurred on the machine. Not all events are stored. The record contains the last 500 events and diagnostics listed in the order of occurrence. The newest events appear at the top of the list. The event list transfers the oldest data into the event summary list when the event list exceeds 500 records. The event summary list is composed of the first five occurrences, last five occurrences, and the worst five occurrences. The event summary list is limited to 500 records.The event list is accessible from the following:
VIMSpcSnapshots
C Series
Snapshot - The snapshot stores a segment of history for all parameters (channels) in 1 second intervals. A snapshot can be triggered automatically based on a pre-configured diagnostic or event. The trigger can be configured via the CMPD. A snapshot can be triggered automatically based on a pre-configured diagnostic or event. The trigger can be configured via the CMPD. The "Trigger Snapshot" menu option on the CMPD can be used to initiate a snapshot manually. A snapshot consists of all of the parameters that describe a system condition. The snapshot records data from 5 minutes before the event to 1 minute after the event. This strategy is also applied to snapshots that are triggered immediately after key ON. However, a portion of the 5 minutes of data that occurred prior to the event was captured prior to turning the key off. This portion of data may have been stored hours or days before the event that triggered the snapshot. VIMS 3G has the capability of storing two sets of snapshot information. If a snapshot is in the process of being recorded and a second snapshot is triggered, the second snapshot will be recorded simultaneously.Snapshot information is accessible only with VIMSpc.Data Logger
Continuous Data Logger
Continuous Data Logger - The continuous data logger captures all of the parameters that are monitored