CONTROL GP-HYDRAULIC HAND 7V3674 - Caterpillar

injection test benches with serial numbers 1251 and up now have tie bars which connect the main drive unit to the support for the output shaft. The bars decrease movement of the main drive unit during operation of the test bench. Formerly, a few test benches had excessive movement of the main drive unit which caused the belts to slip (slide on the pulley), the belts to jump (sudden movement between the pulleys) and/or high stress on the supports. Also, an improved bushing fastens the counter drive pulley to the output shaft. The bushing has two new bolt holes to be used to fasten the degree wheel. Use of the bolts will prevent loosening of the degree wheel during operation of the test bench.
A J-26794 Stabilizer Kit is available which has the new and improved parts for installation on fuel injection test benches with serial number 1001-1250. Complete installation instructions are included in the kit. The kit can be ordered from:
Kent-Moore Tool Division
Kent-Moore Corporation
1501 South Jackson Street
Jackson, Michigan 49203
Attn: Diesel and Allied Products Desk
J-26794 Stabilizer Kit.The price of the kit is $30.55. This price can be changed without notice.