CONTROL GP-TRANSMISSION HYD 8E5116 - Caterpillar

Illustration 1 g01407443
(23) 212-4962 Pilot Cartridge Valve Gp (1) Torque for 16 plugs ... 12 3 N m (9 2 lb ft) (2) Tighten the two bolts. Torque ... 5 N m (45 lb in) Torque for the adapters ... 45 5 N m (33 4 lb ft) Final torque for the two bolts ... 12 3 N m (9 2 lb ft) (3) Torque for connector ... 28 4 N m (21 3 lb ft) (4) Torque for cap ... 12 3 N m (9 2 lb ft) (5) Do not allow the hex to turn when you install the handles. (6) Apply an adequate amount of 1P-0808 Multipurpose Grease to the surfaces that move.Note: Apply 4C-4030 Thread Lock Compound to the threads. (7) Torque for swivel ... 45 5 N m (33 4 lb ft)Note: Do not allow the hex to turn when you install the handles. (8) Torque for spacer ... 45 5 N m (33 4 lb ft) (9) 6J-9996 Spring Length under test force ... 15.88 mm (0.625 inch) Test force ... 60.0 6.0 N (13.3 1.3 lb) Free length after test ... 20.24 mm (0.797 inch) Outside diameter ... 5.11 to 5.54 mm (0.201 0.218 inch) (10) Apply an adequate amount of 1P-0808 Multipurpose Grease to the cup and to the plunger on surfaces that move. (11) 159-3781 Springs Length under test force ... 7.60 mm (0.299 inch) Test force ... 24.0 2.0 N (5.4 0.4 lb) Free length after test ... 17.46 mm (0.687 inch) Outside diameter ... 14.28 mm (0.562 inch) (12) Apply an adequate amount of 1P-0808 Multipurpose Grease to the pin and to the surfaces of the cartridge that move. (13) Tighten the adapter. Torque for the two bolts (2) ... 5 N m (45 lb in) Torque for the adapters ... 45 5 N m (33 4 lb ft) Final torque for the two bolts (2) ... 12 3 N m (9 2 lb ft) (14) Apply an adequate amount of 1P-0808 Multipurpose Grease to the surfaces that move. (15) 153-8946 Spring Length under test force ... 4.000 mm (0.1575 inch) Test force ... 24.00 2.40 N (5.4 0.5 lb) Free length after test ... 5.20 mm (0.205 inch) Outside diameter ... 10.00 mm (0.394 inch)Note: Apply 4C-4030 Thread Lock Compound to the threads. (16) Torque for two bolts ... 28 4 N m (21 3 lb ft) (17) Tighten the adapters. Torque for the two bolts (2) ... 5 N m (45 lb in) Torque for the adapters ... 45 5 N m (33 4 lb ft) Final torque for the two bolts (2) ... 12 3 N m (9 2 lb ft) (18) Apply an adequate amount of 1P-0808 Multipurpose Grease to the pin and to the surface of the cartridge