CONTROL GP-TRANSMISSION HYD 8E7038 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     8T-0812     Cylinder Liner Puller     1    
1U-6317 Bridge     1    
1U-6319 Socket     1    Start By:
Remove the spacer plate. Refer to Disassembly and Assembly, "Spacer Plate - Remove and Install".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00474523
Turn the crankshaft until two of the pistons are at the bottom center. Remove two connecting rod cap bolts (2) from each rod. Remove connecting rod caps (4) .
Tap connecting rod (3) away from the crankshaft with a soft hammer. Remove bearing half (1) .
Illustration 2 g00474623
Use tool (A) to remove cylinder liners (5) .
Remove the pistons and connecting rods from the cylinder liners.