CONTROL GP-TRANSMISSION HYD 8P8975 - Caterpillar

"Exhaust Brake/Warm Up Enable"
This parameter determines the functionality of the exhaust brake. The exhaust brake can be programmed only as an exhaust brake to aid in slowing the vehicle or the exhaust brake can be programmed to put a load on the engine in order to warm up the engine at a faster rate.
Table 1
Alternatives Default
None
Exhaust Brake Only
Warm-Up
Exhaust Brake and Warm-Up Exhaust Brake Only "Warm Up Mode Idle Speed"
This parameter will not allow the operator to program the idle speed above the normal range. Normal "Low Idle Speed" is 700 to 1400 rpm.
Table 2
Alternatives Default
None
700 to 1400 rpm 1000 rpm "Auto Retarder in Cruise"
This parameter allows the exhaust brake to automatically become enabled if the vehicle speed exceeds the "Cruise Control Set Speed" by a predetermined amount.
Table 3
Alternatives Default
0 km/h (0 mph) 5 to 16 km/h (3 to 10 mph)