CONTROL GP-TRANSMISSION HYD 8P8984 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01113831
Attach a suitable lifting device on oil filter housing support (11). The weight of oil filter housing support (11) is approximately 70 kg (155 lb). Position oil filter housing support (11) and install bolts (10).
Install Tooling (A) and a suitable lifting device on engine oil filter housing (9). The weight of engine oil filter housing (9) is approximately 35 kg (77 lb). Position engine oil filter housing (9) and install bolts (8). Remove Tooling (A).
Illustration 2 g01113751
Position plate (7) and install bolts (6).
Install spacers (5) and bolts (4) to secure tube assembly (3).
Illustration 3 g01113749
Install the O-ring seal on adapter (2). Install the adapter and install bolts (1).
Disconnect the oil pressure sensors.
Check the oil level. Maintain the oil level at the "FULL" mark. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct filling procedure.End By:
Install the fuel filter housing. Refer to Disassembly and Assembly, "Fuel Filter Housing - Install".