CONTROL GP-ELECTRONIC 8T8770 - Caterpillar

Illustration 1 g03183697
Table 1
Specification for 372-9203 Final Drive, Brake, and Wheel Gp
Item Qty Part Specification Description
1 10 9X-2404 Bolt Torque to 530 70 N m (391 52 lb ft).
2 3 223-5836 Shaft Diameter of the shaft is 77.577 0.010 mm (3.0542 0.0004 inch).
3 3 389-5879 Planetary Gear Inside diameter of the gear is 112.44 0.010 mm (4.427 0.0004 inch).
4 - - Apply 2 mm (0.0787 inch) of Loctite H-Flex Gastet Makerto the mating surface of the cover and the button.
5 1 175-2853 Shim Pack Thickness of the shim pack is 2.85 mm (0.1122 inch).
6 1 314-4122 Duo-Cone Seal Gp Seals and all surfaces that contact the seals must be clean and dry when the parts are assembled. Apply a thin coat of oil on the contact surfaces of the metal seals prior to installation. The metal seals must be assembled square with the bore. The seals must not bulge and must not be twisted.
1 365-4920 Duo-Cone Seal Gp
7 1 5P-4484 Magnetic Plug Torque to 90 15 N m (66 11 lb ft).
8 1 5K-7696 Plug Torque to 50 5 N m (36 4 lb ft).