CONTROL GP-GOVERNOR 9L6743 - Caterpillar

circumstances, other root causes can trip these codes. Assessing and addressing these codes in a timely fashion is important. Caterpillar recommends that at a minimum, each instance should be recorded in the ships log, with the reason for the code, and any proof that acceptable DEF was provided. If the reason for the code is that the owner or operator did not provide sufficient DEF of the required quality, then a report should be sent to the EPA Designated Enforcement Officer within the 30-day window at:Director
Air Enforcement Division
U.S. Environmental Protection Agency
1200 Pennsylvania Ave. NW.
Washington, DC 20460
The following examples are codes that may not require reporting.
Operation of an engine under a valid test exemption.
Operation during engine commissioning.
SCR system failureThe accumulated counters are displayed on the engine alarm and control panel as shown in illustration 1.
Illustration 1 g06318883
Typical example of accumulated counters on the engine alarm and control panel.
Add Primary totals (3) to back totals (1) for the correct amount of time out of compliance. Fluid quality counter (2) adds ECM totals together. Do not add fluid qualities together.
Table 3
Setpoints for Aftertreatment
Condition Parameter Application Alarm Setpoint (Default) Derate Setpoint (Default) Shutoff Setpoint (Default)
High(1) SCR Inlet Temperature 500° C (932° F)
High(2) SCR Inlet Temperature 525° C (977° F)
High(3) SCR Inlet Temperature 575° C (1067° F)
Low SCR Inlet Temperature Map - On
High SCR Outlet Temperature Map - On
High SCR Outlet Temperature Map - On
High SCR Outlet Temperature Map - On
Low SCR Outlet Temperature Map - On
High DEF Pressure Map - On
Low DEF Pressure Map - On
High DEF Dosing Air Pressure 450 kPa (65.3 psi)
Low DEF Dosing Air Pressure 400 kPa (58 psi)
Low DEF Dosing Air Pressure 275 kPa (40 psi)
High DEF Concentration Map - On
Low DEF Concentration Map - On
High DEF Manifold Temperature 50° C (122° F)
Low DEF Manifold Temperature −5° C (23° F)
Low DEF Manifold Temperature −10° C (14° F)
High CEM Inlet Air Pressure Map - On
Low CEM Inlet Air Pressure Map - On
Low DEF Buffer Tank Level 14 percent
Low DEF Buffer Tank Level 7 percent
Low DEF Buffer Tank Level 0 percent
High DEF Bulk Tank Level Switch Closed
Low DEF Bulk Tank Level Switch Closed
High NOx Conversion Map - On
Low NOx Conversion Map - On
Low Tank Temperature −6° C (21.2° F)
Low Tank Temperature −8° C (17.6° F)
Low Tank Temperature −9° C (16° F)
High Tank Temperature 50° C (122° F)
(1) Low
(2) Medium
(3) High