CONTROL GP-TMSN OIL SYSTEM 9P3434 - Caterpillar

div_show_hide aslink" data-element=".content_table_18171615141312111098761817161514131211109876">
Electrical shock hazard. The electronic unit injector system uses 90-120 volts.
The ECM sends a high voltage signal to the fuel injectors. To help prevent personal injury, disconnect the fuel injector connector. Do not come in contact with the harness connector for the fuel injector while the engine is operating.Engine Lifting (3)
The safety message for lifting the engine is located on the valve covers.
Illustration 4 g00306083
Improper lift rigging can allow unit to tumble causing injury and damage.
Flash Fire
The safety message for flash fire is located on the crankcase covers.
Illustration 5 g00123185
Flash fire may result in personal injury, if crankcase covers are removed within fifteen minutes after emergency shut down. Do not restart engine until cause for shutdown has been corrected.
Type 2 (If Equipped)
The safety messages that may be attached on the engine are illustrated and described below.
Illustration 6 g01367174
Typical example
Illustration 7 g01367176
Typical exampleUniversal Warning (1)
Illustration 8 g01105289
This safety message is located on the first cylinder and the last cylinder on each side of 12 and 16 cylinder engines.
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Hot Surface (2)
Illustration 9 g01085603
This safety message is located on the valve cover of cylinder 13 cylinder 14.
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Pressurized System (3)
Illustration 10 g01128011
This safety message is located on the housing for the duplex oil and fuel filters.
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.