CONTROL GP-ELECTRONIC 9X3434 - Caterpillar

Connect the AX-T1 terminal of harness (57) to the inboard main power stud (AN). Torque to 16 0.25 N m (141 2 lb in).
Illustration 36 g03873244
(54) 117-9080 Magnetic Switch Gp
(57) 394-5386 Wiring Harness
(58) 7K-1181 Cable Strap
Connect the AX-C9 connector (57B) to the connector (54A) on magnetic switch group. Secure the two connectors to wiring harness (57) and cab harness assembly (AP) with one cable strap (58).
Illustration 37 g03873351
(54) 117-9080 Magnetic Switch Gp
(57) 394-5386 Wiring Harness
(58) 7K-1181 Cable Strap
Ensure that fuse is connected to the AX-C1 connector (57C). Secure both wiring harness (57) and cab harness assembly (AP) with one cable strap (58).
Connect the AX-T3 terminal (57D) to the outboard stud on top of magnetic switch group (54).
Connect the AX-T4 terminal (57E) to the inboard stud on top of magnetic switch group (54).
Torque the connections on top of magnetic switch group (54) to 5.5 0.5 N m (48 4 lb in).
Illustration 38 g03873650
(57) 394-5386 Wiring Harness
(58) 7K-1181 Cable Strap
Route wiring harness (57) along cab harness assembly (AP). Secure the two harnesses together with several of cable straps (58).
Connect the AX-C4 connector (57F) to the FC-C1 connector (AQ).
Illustration 39 g03873667
(57) 394-5386 Wiring Harness
Connect terminal AX-T2 (57G) to the cab ground stud (AR). Torque the connection to 15 3 N m (133 27 lb in).
Illustration 40 g03873679
(9) 345-3504 Hydraulic Oil Cooler and Mounting Gp
(35) 456-1349 Tube As
(36) 398-9364 Tube As
(38) 398-9354 Hose As
(57) 394-5386 Wiring Harness
(59) 3S-2093 Cable Strap
Route the remainder of wiring harness (57) along tube assembly (36). Use several of cable straps (59) to secure the wiring harness to the machine.
Continue to route wiring harness (57) along hose assembly (38) securing the harness with several cable straps (59).
Connect terminal AX-C2 to hydraulic oil cooler and mounting group (9).
Illustration 41 g03873753
(7) 7K-3262 Screw
(8) 7X-2031 Retainer
(60) 443-9071 Cover As
Assemble two screws (7) and two retainers (8) onto the top of cover assembly (60).
Illustration 42 g03873765
(9) 345-3504 Hydraulic Oil Cooler and Mounting Gp
(33) 8T-4121 Hard Washer
(34) 8T-4136 Bolt
(60) 443-9071 Cover As
Install cover assembly (60) over hydraulic oil cooler and mounting group (9). Secure the cover with seven bolts (34) and hard washers (33).
Illustration 43 g03873791
(38) 398-9354 Hose As
(39) 398-9355 Hose As
(57) 394-5386 Wiring Harness
(61) 466-3510 Hose Guard
Encase wiring harness (57), hose assembly (38), and hose assembly (39) with hose guard (61).