CONTROLET ASSEM. 8N5122 - Caterpillar

Assembly Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-5218 Bolt 2
B 1U-5429 Pliers-Snap-Ring 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06275438
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Illustration 2 g06275440
Illustration 3 g06275441
Install Tooling (A) to compress the spring until the plate is seated. Install and secure two bolts, then remove Tooling (A) and install the remaining bolts.
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Illustration 4 g06275442End By:
Install the relief valve