3947601 CONTROLLER Caterpillar parts
C7.1
Rating:
Alternative (cross code) number:
CA3947601
394-7601
3947601
CA3947601
394-7601
3947601
Weight: 0.57 pounds 0 kg.
GENERATOR SET,
Compatible equipment models: 3947601:
Number on catalog scheme:
2
For full view, you need register
Information:
Removal Procedure
Start By:
Release the hydraulic system pressure.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the cooling system pressure cap is cool enough to touch with your bare hand.Remove the cooling system pressure cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Turn the battery disconnect switch to the OFF position.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper procedure.
Illustration 1 g01425950
Open grill assembly (2). Repeat this step for the other side of the machine.
Remove shield assemblies (1).
Illustration 2 g02162966
Remove elbow (3). Disconnect hoses (5). Loosen the hose clamps and disconnect elbow (6). Remove cover assembly (4) and the O-ring seal.
Illustration 3 g02162975
Remove water pump (7) and the O-ring seal. Installation Procedure
Install water pump (7) in the reverse order of the removal procedure.
Tighten the hose clamps for elbow (6) to a torque of 7.5 1.0 N m (66.38 8.85 lb in).
Start By:
Release the hydraulic system pressure.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin. At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the cooling system pressure cap is cool enough to touch with your bare hand.Remove the cooling system pressure cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Turn the battery disconnect switch to the OFF position.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper procedure.
Illustration 1 g01425950
Open grill assembly (2). Repeat this step for the other side of the machine.
Remove shield assemblies (1).
Illustration 2 g02162966
Remove elbow (3). Disconnect hoses (5). Loosen the hose clamps and disconnect elbow (6). Remove cover assembly (4) and the O-ring seal.
Illustration 3 g02162975
Remove water pump (7) and the O-ring seal. Installation Procedure
Install water pump (7) in the reverse order of the removal procedure.
Tighten the hose clamps for elbow (6) to a torque of 7.5 1.0 N m (66.38 8.85 lb in).
Caterpillar parts catalog:
Parts controller Caterpillar catalog:
3972748
CONTROLLER
C7.1
C7.1
3972748
CONTROLLER
C7.1
C7.1
3458207
CONTROLLER
C6.6
C6.6
2725831
CONTROLLER
C4.4
C4.4
2364898
CONTROLLER
120M, 3412C, 966H, C27, C32
120M, 3412C, 966H, C27, C32
3805789
CONTROLLER
C4.4
C4.4
3661751
CONTROLLER
C4.4
C4.4
3375712
CONTROLLER AS
3516C, C32, PMG3516
3516C, C32, PMG3516
1264249
CONTROLLER
3412, 3412C
3412, 3412C