9N7980 CONTROLLER GP Caterpillar parts
RM-250C, RR-250, RR-250B, SS-250
Rating:
Alternative (cross code) number:
CA9N7980
9N-7980
9N7980
CA9N7980
9N-7980
9N7980
Weight: 2 pounds 0 kg.
RECLAIMER MIXER, SOIL STABILIZER,
Compatible equipment models: 9N7980:
Number on catalog scheme:
63
For full view, you need register
Information:
12 Volt Products Equipped With Batteries and Disconnect SwitchesWhen replacing the batteries, battery cables, or disconnect switch, use the following procedure to reduce the possibility of sparks at the battery or cable connections.
1. Turn off the start switch and all electrical loads such as wipers, heater motors, etc.2. Turn off (open) the disconnect switch and remove the key.3. Turn on an accessory light (except cab dome light). If the accessory is dead, go to Step 5. If accessory turns on, disconnect switch is shorted. Continue with Step 4.4. At the disconnect switch, disconnect the cable routed from the frame of the product. (There are two cables at the disconnect switch. One cable connects to the frame, the other to the negative battery terminal.) Be sure this loose cable end cannot contact either stud on the disconnect switch. Diagnose and replace the disconnect switch as required.5. At the battery, disconnect the negative cable routed from the disconnect switch. When two or more batteries are involved, disconnect all negative battery terminal cables on all batteries that connect to one side of the disconnect switch.6. Complete necessary repairs to the system.7. Do Steps 2 through 5 in reverse.
1. Turn off the start switch and all electrical loads such as wipers, heater motors, etc.2. Turn off (open) the disconnect switch and remove the key.3. Turn on an accessory light (except cab dome light). If the accessory is dead, go to Step 5. If accessory turns on, disconnect switch is shorted. Continue with Step 4.4. At the disconnect switch, disconnect the cable routed from the frame of the product. (There are two cables at the disconnect switch. One cable connects to the frame, the other to the negative battery terminal.) Be sure this loose cable end cannot contact either stud on the disconnect switch. Diagnose and replace the disconnect switch as required.5. At the battery, disconnect the negative cable routed from the disconnect switch. When two or more batteries are involved, disconnect all negative battery terminal cables on all batteries that connect to one side of the disconnect switch.6. Complete necessary repairs to the system.7. Do Steps 2 through 5 in reverse.
Caterpillar parts catalog:
Parts controller Caterpillar catalog:
1066345
CONTROLLER
RR-250
RR-250
1388585
CONTROLLER AS
CP-573E, CP-663E, CS-533D, CS-563C, CS-563D, CS-563E, CS-573C, CS-573D, CS-583C, CS-583D, CS-583E, CS-663E, CS-683E
CP-573E, CP-663E, CS-533D, CS-563C, CS-563D, CS-563E, CS-573C, CS-573D, CS-583C, CS-583D, CS-583E, CS-663E, CS-683E
1343845
CONTROLLER-VIBRATORY
CS-563C, CS-573C
CS-563C, CS-573C
1DE2433
CONTROLLER
R2900
R2900
3859780
CONTROLLER AS
R1600H
R1600H
3541827
CONTROLLER
2470C, 2570C, 2670C, 2864C, 521B, 522B, 541 2, 552 2, 553C, 563C, 573C, 586C, 773G OEM, 775G OEM, 777G, 785D
2470C, 2570C, 2670C, 2864C, 521B, 522B, 541 2, 552 2, 553C, 563C, 573C, 586C, 773G OEM, 775G OEM, 777G, 785D
3187929
CONTROLLER AS
R1700G
R1700G
3225193
CONTROLLER AS
RM-300, RM-500
RM-300, RM-500
2511299
CONTROLLER
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E
CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E
2907912
CONTROLLER
CB-434D, CB-534D, CB-564D, CD-54
CB-434D, CB-534D, CB-564D, CD-54
2052314
CONTROLLER AS
CP-433E, CS-423E, CS-433E
CP-433E, CS-423E, CS-433E
1930920
CONTROLLER AS
AP-900B, RM-300, RM-500
AP-900B, RM-300, RM-500
2316226
CONTROLLER
AP-900B
AP-900B