CONVERSION KIT 0836980 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     9S-9153     Puller Jaw     3    
1P-2326 Forcing Screw     1    
1P-2325 Head     1    
3H-0462 Bolt     6    
8H-0709 Strap     6    
1P-0520 Driver Gp     1    Start By:
Remove the drum scraper assembly. Refer to Disassembly and Assembly, "Drum Scraper - Remove and Install".
Remove the drum propel motor. Refer to Disassembly and Assembly, "Piston Motor (Drum Propel) - Remove".
Remove the vibratory motor. Refer to Disassembly and Assembly, "Gear Motor (Vibratory) - Remove".
Illustration 1 g01085866
Attach a suitable lifting device to support assembly (2) .
Remove bolts (1) and bolts (3). Remove support assembly (2) from the machine. The weight of support assembly (2) is approximately 90 kg (198 lb).
Illustration 2 g01046174
Remove bolts (4) and remove plate (5) .
Illustration 3 g01046176
Use a screwdriver to remove retaining ring (6). Remove seal ring (7) .
Use Tooling (A) in order to separate support (10) from support (11) .
If necessary, remove bearing (8) and seal ring (9) from support (10) .
Illustration 4 g01085868
Remove suitable blocking (13) and remove drum (12) from the machine. The weight of the drum on the CB-214E is approximately 340 kg (750 lb). The weight of the drum on the CB-224E and CB-225E is approximately 385 kg (850 lb).
Position suitable blocking (13) on both sides of the drum.