CONVERSION AR-ENGINE 2063917 - Caterpillar

Quad Link Track Group (Typical Example Shown)(1) Torque for bolts that hold the half links together ... 170 40 N m (125 30 lb ft) Then turn an additional ... 180°Put 2P2506 Anti-Seize Compound on the threads, body, and washer face of each bolt before installation.(2) Torque for bolts that hold track shoes to link ... 170 40 N m (125 30 lb ft) Use SAE 30W oil on bolt threads and washer face before installation.Then turn an additional ... 120°(3) Track link assembly.(4) Link joint assembly (L.H.).(5) Master link pin end (L.H.).(6) Master link bushing end (L.H.).(7) Seal washers must be positioned as shown and compressed flat while bolts are tightened. The Tri Link track group consists of a track link assembly and one set of link joint assemblies and master links. The link joint assemblies are located on the outboard side of the track. The track shoes are also offset on the track link assembly.