AVSPARE.COM
parts catalog

CONVERSION AR-MACHINE 2365666 - Caterpillar


2365666 CONVERSION AR-MACHINE Caterpillar parts 914G, IT14G, IT14G2
Rating:
57
Alternative (cross code) number:
CA2365666
236-5666
2365666
Caterpillar 2365666 CONVERSION AR-MACHINE

Buy CONVERSION AR-MACHINE 2365666 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER, INTEGRATED TOOLCARRIER,

Compatible equipment models: 2365666:

COMPACT WHEEL LOADER  914G  
INTEGRATED TOOLCARRIER  IT14G   IT14G2   Caterpillar
Number on catalog scheme:
  For full view, you need register

Information:


Illustration 1 g00728701
Pump compartment (39) Locknut (40) Setscrew
Illustration 2 g00394882
Pump regulator (39) Locknut (40) Setscrew (41) Shim
Loosen locknut (39) .
Turn setscrew (40) until output flow is adjusted to the correct specification. Turning setscrew (40) clockwise will increase the output flow of the pump. Turning setscrew (40) counterclockwise will decrease the output flow of the pump. A 1/4 turn of setscrew (40) will change the output flow of the pump at the following pressures.
The output flow of the pump will change approximately 3.4 L/min (0.9 US gpm) at a system pressure of 13700 kPa (1975 psi) when the constant horsepower flow control is active in the first stage of the hydraulic horsepower curve.
The output flow of the pump will change approximately 2.6 L/min (0.7 US gpm) at a system pressure of 31400 kPa (4550 psi) when the constant horsepower flow control is active in the second stage of the hydraulic horsepower curve.
Use shim (41) in order to adjust the output flow of the pump along the hydraulic horsepower curve. Changing the thickness of the shim will change the output flow of the pump in the following manner.
A change in the thickness of the shim of 0.1 mm (0.004 inch) will change the flow rate approximately 0.54 L/min (0.14 US gpm) at the first stage of the hydraulic horsepower curve.
A change in the thickness of the shim of 0.1 mm (0.004 inch) will change the flow rate approximately 0.1 L/min (0.03 US gpm) at the second stage of the hydraulic horsepower curve.
Tighten locknut (39) to a torque of 240 20 N m (175 14 lb ft).

Caterpillar parts catalog:

Caterpillar parts catalog
IT14G Integrated Tool Carrier FWL00001-UP (MACHINE) POWERED BY 3054C Engine
914G2 Compact Wheel Loader and IT14G2 Integrated Tool Carrier ERP00001-UP (MACHINE) POWERED BY C4.4 Engine
914G Wheel Loader PDF00001-UP (MACHINE) POWERED BY 3054C Engine
914G2 Compact Wheel Loader and IT14G2 Integrated Tool Carrier ERP00001-UP (MACHINE) POWERED BY C4.4 Engine


Parts conversion Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.