2843292 CONVERSION AR-ENGINE Caterpillar parts
65C
Rating:
Alternative (cross code) number:
CA2843292
284-3292
2843292
CA2843292
284-3292
2843292
CHALLENGER,
This part in 6 request:
Show.
This information for suppliers only!
2023-07-09
2023-06-09
2023-01-31
2022-11-03
2022-09-28
2022-09-16
Compatible equipment models: 2843292:
For full view, you need register
Information:
Removal Procedure
Start By:
Remove crankshaft front seal. Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque Values.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining/filling procedure.
Illustration 1 g03190716
Disconnect hose assemblies (1) from the oil cooler.
Illustration 2 g03190717
Remove bolts (2).
Remove front housing (3) and the gasket. Installation Procedure
Install front housing (3) in the reverse order of removal.
Clean all the gasket surfaces of the cylinder block.
Illustration 3 g03190936
Apply liquid gasket to the seam between the lower crankcase section (5) and the upper crankcase section (4).
Install 13 bolts (2) in a side to side sequence. Tighten bolts (2) to a torque of 24 to 27 N m (18 to 20 lb ft).
Start By:
Remove crankshaft front seal. Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque Values.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining/filling procedure.
Illustration 1 g03190716
Disconnect hose assemblies (1) from the oil cooler.
Illustration 2 g03190717
Remove bolts (2).
Remove front housing (3) and the gasket. Installation Procedure
Install front housing (3) in the reverse order of removal.
Clean all the gasket surfaces of the cylinder block.
Illustration 3 g03190936
Apply liquid gasket to the seam between the lower crankcase section (5) and the upper crankcase section (4).
Install 13 bolts (2) in a side to side sequence. Tighten bolts (2) to a torque of 24 to 27 N m (18 to 20 lb ft).
Caterpillar SIS machinery equipment:
Parts conversion Caterpillar catalog:
3093858
CONVERSION AR-ENGINE
16H NA
16H NA
3046672
CONVERSION AR-ENGINE
16H NA
16H NA
2749911
CONVERSION AR-ENGINE
966F II
966F II