CONVERSION GP-CONTROL VALVE 2886536 - Caterpillar

Illustration 1 g01006565
(1) Screen (inside tank) (35a) Pressure switch (stop light) (35b) Pressure switch (transmission signal) (36) Service brake control valve (37) Accumulator (front service brakes) (38) Check and pressure reducing valve (39) Parking brake accumulator (40) Pressure switch (parking brake) (41) Parking brake (42) Manifold (43) Accumulator (service brakes for the trailer) (44) Pressure switch (brake) (45) Parking brake control valve (46) Brake calipers for the front axle (47) Brake calipers for the center axle (48) Brake calipers for the rear axle (49) Piston pump (50) Tank (B) Hoist system (D) Suspension system
Illustration 2 g01003103
Service brake control valve (36), pressure switch (35a), pressure switch (35b) and manifold (42) are located beneath the hood on the front of the cab.
Illustration 3 g00849335
Accumulator (37) and accumulator (43) are located behind a panel on the right side of the cab.
Illustration 4 g00849336
Check and pressure reducing valve (38) is located above the steering cylinder on the right side of the machine. Pressure switch (44) is installed in the check and pressure reducing valve.
Illustration 5 g00849337
Parking brake accumulator (39) is located on the inside of the rear frame.
Illustration 6 g00849338
Parking brake control valve (45) is located on the inside right of the rear frame. Pressure switch (40) is installed in the parking brake control valve.
Illustration 7 g00849341
Parking brake (41) is located in front of the center axle.
Illustration 8 g00849339
Brake calipers (46), (47), and (48) (if equipped) are located on the inside of the wheels.
Illustration 9 g00849342
Piston pump (49) is located on the left side of the engine.
Illustration 10 g00849343
Tank (50) is located on the left side of the machine. Screen (1) is located inside the tank.