CONVERSION AR-CERTIFICATION 2893512 - Caterpillar

Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Initially, replace the transmission oil filter after 250 service hours. Also, replace the transmission oil filter after the initial 500 service hour interval. Thereafter, replace the transmission oil filter after every 500 service hours.The transmission oil filter is located behind the access cover on the right side of the machine.
Remove the filter housing drain plug. The filter housing drain plug is located under the fender on the right side of the machine. Drain the oil into a suitable container. Reinstall the filter housing drain plug.
Illustration 1 g01044632
AEC AGN ABJ1-1499
Illustration 2 g01379709
AEC AGN ABJ1500-Up
Remove filter element cover assembly (1) .
Remove the filter element and properly discard the filter element.
Clean the filter element housing with a clean cloth.
Inspect the seal. If the seal is damaged, replace the seal.
Install the new filter element. Install filter element housing cover (1) .
Start the engine.
Maintain the oil level to the "FULL" mark on dipstick (2). If necessary, add oil through filler tube (3) .
Stop the engine.