AVSPARE.COM
parts catalog

CONVERSION AR 5089006 - Caterpillar



5089006 CONVERSION AR Caterpillar parts CONVERSION
Rating:
56
Alternative (cross code) number:
CA5089006
508-9006
5089006
Caterpillar 5089006 CONVERSION AR
Weight: 19 pounds 8 kg.

Buy CONVERSION AR 5089006 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:
 
  For full view, you need register

Information:


Personal injury can result from contact with refrigerant.This system is under pressure at all times, even if the engine is not running. Heat should never be applied to a charged system.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use caution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, evacuate the system recovering the refrigerant before removing the fitting.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Before any checks of the air conditioning and heating system are made, move the machine to a smooth horizontal surface. Lower all implements to the ground. Make sure the transmission is in neutral or park and that the parking brake is engaged. Keep all other personnel away from the machine or where they can be seen.
Personal injury can result from hot coolant. Any contact with hot coolant or with steam can cause severe burns. Allow cooling system components to cool before the cooling system is drained.
Never weld or solder any charged components.
Care must be taken during removal of air conditioner lines. Before disconnecting any tube fittings, refer to Testing and Adjusting, "Refrigerant Recovery" in order to recover all refrigerant from the system.Place dust caps on all hoses and fittings upon disconnecting.Do not fold or twist hoses when you are routing the new hoses onto the machine. Damage can occur to the inner layers of the hoses and damage can cause premature failure.Reassemble fittings by using the correct torque values for assembly of the air conditioning unit. Refer to Specifications, SENR3130, "Torque Specifications" in order to find the correct torque value.Use the following procedure to reassemble the connections.Proper Technique for Assembly
Illustration 1 g01519272
Drip clean mineral oil onto the clean O-ring.
Illustration 2 g01519286
Place the O-ring on fitting.
Illustration 3 g01519288
Oil the O-ring again.
Illustration 4 g01519290
Align fittings and ensure that the seal is seated correctly. Hand tighten the fittings together. Note: DO NOT CROSS THREAD.
Illustration 5 g01519291
Tighten the connection with proper torque. Use a wrench to avoid twisting parts.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts conversion Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.