CONVERSION AR-NONCAB 5C8744 - Caterpillar

5C8744 CONVERSION AR-NONCAB Caterpillar parts 966D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5C8744
5C-8744
5C8744

Buy CONVERSION AR-NONCAB 5C8744 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 5C8744:

WHEEL LOADER 966D Caterpillar

For full view, you need register

Information:

Table 1
Diagnostic Trouble Codes
CDL Code J1939 Code Code Description
(code descriptions may vary) Comments
E362 (1) 190-15 Engine Overspeed The code is logged.
E362 (3) 190-0 Engine Overspeed The code requires factory passwords to be cleared. Probable Causes
Proceeding down steep grades (if applicable)
Proper operation of the turbocharger
Intake air
Starting aids that are not operating properlyRecommended Actions
Note: The procedures have been listed in order of probability. Complete the procedures in order.
Table 2
Troubleshooting Test Steps Values Results
1. Proceeding Down Steep Grades (If Applicable)
Engaging the engine brakes on a steep grade may be necessary.
A. The operator needs to understand the proper operation of the machine while using the engine brakes.
Not all applications have engine brakes.

Steep grades

Result: Steep grades are the cause of the overspeed.
Control the engine speed during steep grades.
Result: Steep grades are not the cause of the overspeed.
Proceed to Test Step 2.

2. Proper Operation of the Turbocharger
A. Check for proper operation of the turbocharger.
B. Check for any oil that may be leaking into the air inlet.

Turbocharger

Result: The turbocharger is leaking oil into the inlet.
Repair or replace the turbocharger.
Result: The turbocharger is not leaking oil into the inlet.
Proceed to Test Step 3.

3. Intake Air
A. Check for combustible gases in the surrounding atmosphere.
B. Check for proper operation of starting aids (if equipped).

Air quality

Result: The atmosphere has combustible gases.
Do not operate the engine in an environment with combustible gases.
Complete the procedure in the order in which the steps are listed.The procedure corrected the issue. Return the engine to service.The procedure did not correct the issue.Contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).