2429339 CONVERTER Caterpillar parts
3054, 3056
Rating:
Alternative (cross code) number:
CA2429339
242-9339
2429339
CA2429339
242-9339
2429339
Weight: 0.65 pounds 0 kg.
GENERATOR SET,
Information:
Schematic
Illustration 1 g00320406
(1) AUTO lube tank
(2) Air tank check valves
(3) Drain valves
(4) Primary air tank
(5) Starter relay valve
(6) Attachment shutters for the left cylinder and for the right cylinder
(7) Attachment inversion valve
(8) Solenoid valve for attachment shutters
(9) Air relief valve for primary air tank
(10) Starter solenoid valve
(11) Air starting motor
(12) Brake air relay valve for the pulled unit
(13) Brake air relay valve
(14) Air compressor with air compressor governor
(15) Air dryer with an air relief valve
(16) External air supply
(17) Brake master cylinders (pulled unit)
(18) Parking and secondary brake valve
(19) Torque converter and front brake cooling diverter valve
(20) Brake master cylinder (front)
(21) Brake master cylinders (rear)
(22) Pulled unit air control valve
(23) Gauge for brake air pressure
(24) Machine autolube solenoid
(25) Air system pressure protection valve
(26) Service brake air control valve
(27) Window wiper motor
(28) Window wiper air control valve
(29) Double check valves
(30) Retarder air control valve
(31) Secondary brake air control valve
(32) Parking brake air control valve
(33) Secondary air tank
(34) Air horn
(35) Automatic Retarder Control (ARC) valve
(36) Horn valve
(37) Cab wall
(A) This is the brake cylinder overstroke limit switch (overstroke switch). The overstroke switch is normally closed. The overstroke switch opens when the pistons in the master cylinder travel too far. A brake overstroke condition can result from low brake fluid level, air in the brake hydraulic circuit, leakage in the brake hydraulic lines, and master cylinder piston seal leaks. An indicator will come on in the cab and the alarm will sound. Do not operate the machine until the cause for the overstroke has been corrected.
(B) This is the brake air pressure switch. The brake air pressure switch monitors brake air pressure. The operator will be alerted to a condition of low air pressure.
(C) This is the pressure switch for the Traction Control System (TCS). This
Illustration 1 g00320406
(1) AUTO lube tank
(2) Air tank check valves
(3) Drain valves
(4) Primary air tank
(5) Starter relay valve
(6) Attachment shutters for the left cylinder and for the right cylinder
(7) Attachment inversion valve
(8) Solenoid valve for attachment shutters
(9) Air relief valve for primary air tank
(10) Starter solenoid valve
(11) Air starting motor
(12) Brake air relay valve for the pulled unit
(13) Brake air relay valve
(14) Air compressor with air compressor governor
(15) Air dryer with an air relief valve
(16) External air supply
(17) Brake master cylinders (pulled unit)
(18) Parking and secondary brake valve
(19) Torque converter and front brake cooling diverter valve
(20) Brake master cylinder (front)
(21) Brake master cylinders (rear)
(22) Pulled unit air control valve
(23) Gauge for brake air pressure
(24) Machine autolube solenoid
(25) Air system pressure protection valve
(26) Service brake air control valve
(27) Window wiper motor
(28) Window wiper air control valve
(29) Double check valves
(30) Retarder air control valve
(31) Secondary brake air control valve
(32) Parking brake air control valve
(33) Secondary air tank
(34) Air horn
(35) Automatic Retarder Control (ARC) valve
(36) Horn valve
(37) Cab wall
(A) This is the brake cylinder overstroke limit switch (overstroke switch). The overstroke switch is normally closed. The overstroke switch opens when the pistons in the master cylinder travel too far. A brake overstroke condition can result from low brake fluid level, air in the brake hydraulic circuit, leakage in the brake hydraulic lines, and master cylinder piston seal leaks. An indicator will come on in the cab and the alarm will sound. Do not operate the machine until the cause for the overstroke has been corrected.
(B) This is the brake air pressure switch. The brake air pressure switch monitors brake air pressure. The operator will be alerted to a condition of low air pressure.
(C) This is the pressure switch for the Traction Control System (TCS). This
Caterpillar parts catalog:
Parts converter Caterpillar catalog:
2560328
CONVERTER AS
3512, 3512B, 3516B
3512, 3512B, 3516B
2560326
CONVERTER AS
3412, 3508, 3508B, G3412
3412, 3508, 3508B, G3412
2350838
CONVERTER-POWER
420D, 420E, SPF343, SPF343C, SPS343, SPT343
420D, 420E, SPF343, SPF343C, SPS343, SPT343
1894630
CONVERTER AS
446B, 446D
446B, 446D
2365083
CONVERTER
216, 228, 236, 247, 248, 267, 287, 301.6C, 302.5C, 904B, 904H
216, 228, 236, 247, 248, 267, 287, 301.6C, 302.5C, 904B, 904H
1217438
CONVERTER AS-TORQUE
TH62, TH63, TH82, TH83
TH62, TH63, TH82, TH83
2560331
CONVERTER AS
3516B, G3516B, G3606B
3516B, G3516B, G3606B
1413284
CONVERTER-VOLTAGE
3508, 3508B, 3512, 3512B, 3516, 3516B
3508, 3508B, 3512, 3512B, 3516, 3516B
7C2520
CONVERTER AS
3512, 3516, 3606, 3608, 3612, 3616, G3512, G3516
3512, 3516, 3606, 3608, 3612, 3616, G3512, G3516
2720506
CONVERTER AS
C4.4
C4.4