CONVERTER AS 4611377 - Caterpillar

Illustration 1 g03589989
(1) Back Key
(2) Left Key
(3) Right Key
(4) Enter Key
(5) “OK” Key The direction keys are used to input the password. Press the Left Key (2) or the Right Key (3) to highlight the desired number. Press the OK Key (5) to set the desired number. To delete a selected number, press the Back Key (1). When four characters have been set, press the Enter Key (4). The monitoring system will check the password. If the password is correct, access to the menu is allowed.Note: The general factory default customer password is "1". The factory default password for the service menu is "9992". After the password has been entered, press the "Enter" (4) key.If the password is incorrect, "Incorrect Password" will be displayed. Press the "OK" Key (5) to retry the password in the previous screen. Refer to Illustration 2.
Illustration 2 g03589991After the password has been successfully entered, the "Service" menu options will be active until the machine is powered down (key OFF). On the next start (key ON), the password must be re-entered to enable the "Service" menu options again.Note: If the customer password is changed to "9992", entry to the Service Menu will be unavailable. To allow entry to Service Menu, the customer password will need to be changed to something other than "9992".