CONVEYOR GP 5088332 - Caterpillar

Removal Procedure
Start By:
Remove the engine enclosure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and helps to keep contaminants from entering the system.
Release the system pressure. Refer to Operation and Maintenance Manual, "System Pressure - Release".
Drain the hydraulic system refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedure.
Illustration 1 g02362921
Disconnect harness assembly (1). Disconnect hoses (2) and (3). Remove filter base (4).
Illustration 2 g02362438
Disconnect hose assembly (5).
Illustration 3 g02362439
Disconnect hose assembly (6). Disconnect hoses (7) and (8).
Illustration 4 g02362841
Disconnect hose assembly (9). Disconnect harness assembly (10).
Illustration 5 g02362440
Remove covers (11) and (12).
Illustration 6 g02362880
Disconnect tube (13).
Illustration 7 g02362898
Disconnect hose (14). Disconnect strap (15).
Remove hydraulic oil tank (16).