COOLANT-ELC 2388650 - Caterpillar

Removal Procedure
Start By:
Remove air cleaner.
Remove the clean emissions module.
Remove exhaust cooler (NRS).
Illustration 1 g06035578
Disconnect hose assembly (1) and tube assembly (2).
Illustration 2 g06035604
Disconnect tube assembly (5).
Remove bolts (3) and cover (4).
Illustration 3 g06035640
Disconnect harness assemblies (6).
Illustration 4 g06035654
Disconnect hose assembly (7) and hose assembly (8).
Illustration 5 g06035666
Remove bolts (9) and rotary actuator (10).
Illustration 6 g06035700
Remove bolts (11) and valve assembly (12).
Illustration 7 g06035762
Remove bolts (13), shield assemblies (14) and shield assembly (15).
Illustration 8 g06035780
Remove bolts (17) and elbow (16).
Illustration 9 g06035811
Remove bolts (18), bolts (19), and bolts (20).
Illustration 10 g06035844
Remove cotter pins (23), pins (22), and lifting eyes (21).
Illustration 11 g06035895
Remove bolts (25) and lift eye retainer (24).
Disconnect harness assemblies (26).
Illustration 12 g06036120
Remove temperature sensor (27) and pressure sensor (28).
Illustration 13 g06036160
Remove bolts (30) and slide flanges (29) FORWARD.
Illustration 14 g06036192
Use a suitable lifting device to remove air inlet manifold (31). The weight of air inlet manifold (31) is approximately 130 kg (287 lb).
Remove bolts (32) and air inlet manifold (31).Installation Procedure
Install air inlet manifold (31) in the reverse order of removal.
Lubricate the bore of flanges (29) with the fluid that is being sealed.
Tighten pressure sensor (28) to a torque of 10 2 N m (89 18 lb in).
Tighten temperature sensor (27) to a torque of 20 3 N m (177 27 lb in).