COOLER & MTG GP-HYDRAULIC OIL 1082508 - Caterpillar

Illustration 6 g03743859
Install housing (21).
Illustration 7 g03743840
Apply Tooling (E) onto springs (20). Install springs (20) into manifold (19).Note: Tooling (E) is used to hold springs (20) in place for assembly.
Illustration 8 g03743768
Install backup rings (15) and O-ring seals (16) onto valve group (14).
Illustration 9 g03743759
Install valve group (14) into housing (13). Tighten valve group (14) to a torque of 65 7 N m (48 5 lb ft).
Illustration 10 g03743774
Install O-ring seal (17) and seals (18) into housing (13).
Illustration 11 g03745927
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install manifold (19) into housing (13).Note: Align manifold (19) with Pin (Y) and ensure that the springs are still in place on manifold (19).
Illustration 12 g03743722
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install housing (13) and bolts (12). Tighten bolts (12) to a torque of 83 8 N m (61 6 lb ft).
Install O-ring seal (11) and shaft (10).
Illustration 13 g03745952
Install housing (6), O-ring seal (4), and bolts (5). Tighten bolts (5) to a torque of 145 15 N m (107 11 lb ft).
Illustration 14 g03745957
Install external discs (8) and internal discs (9) starting with an external disc (8).
Illustration 15 g03745962
Install shims (7).
Illustration 16 g03745968
Install piston (3).
Illustration 17 g03743316
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Use Tooling (A) and a suitable press to install spring (2) and retaining ring (1).End By:
Install the piston motor.