COOLER GP-ENGINE OIL 2304523 - Caterpillar

Torque for bolts that connect the brake lines to the master cylinder and the caps on the brake piston housings ... 50 10 lb.ft.(70 14 N m)(1) Torque for the bolt ... 225 30 lb.ft.(300 40 N m)(2) Thickness of carrier assembly (including lining and plate): New ... .88 in.(22.4 mm)Minimum permissible thickness (worn lining) ... .38 in.(9.6 mm)(Measure the lining at both ends because it can wear more at one end than the other.)(3) Torque for bolt (5/8 in. diameter) ... 195 22 lb.ft.(265 28 N m)(4) Thickness of brake disc: New ... .50 in.(12.7 mm)Minimum permissible thickness (worn) (in area where pad and disc make contact) ... .38 in.(9.7 mm)
TWO WHEEL BRAKE(5), (6) Clearance between pin (6) and brake disc must not be less than .010 in. (0.25 mm). If clearance is less than .010 in. (0.25 mm), turn bolt (5) counterclockwise one turn, slide pin (6) to get .010 in. (0.25 mm) clearance and tighten bolt (5) again.