COOLER GP-HYDRAULIC OIL 3081317 - Caterpillar

Illustration 1 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag to the start switch before you service or repair the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
394-5965 Pilot Lines Gp Revision - 00    
Item    Qty    Part No    Description    
(1)     2     4I-9523     Marker Band (Blue)    
(2)     1     302-2890     Hose As    
(3)     1     164-5546     Tee As    
Illustration 2 g03710925
394-5965 Pilot Lines Gp Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on hose assembly. Plugging hoses and tubes helps to prevent fluid loss, and helps to keep contaminants from entering the system.
Illustration 3 g03710927
(3) 164-5546 Tee As
Install tee assembly to main control valve.
Illustration 4 g03710928
View from under cab (1) 4I-9523 Marker Band (Blue) (2) 302-2890 Hose As
Attach hose to port "B7" on shuttle valve.
Illustration 5 g03711100
(1) 4I-9523 Marker Band (Blue) (2) 302-2890 Hose As (3) 164-5546 Tee As
Route hose as shown.
Illustration 6 g03711102
(1) 4I-9523 Marker Band (Blue) (2) 302-2890 Hose As
Attach hose to port "P1" on solenoid valve.
Illustration 7 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole leaks in pump or motor hoses during a steer stall condition. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury immediately.
Inspect for fluid leaks when the installation is complete.
Unless specified, tighten all hardware and fittings to standard torque.ReferenceTorque Specifications, SENR3130, "Torque Specifications"