COOLER GP-ENGINE OIL 4222064 - Caterpillar

4222064 COOLER GP-ENGINE OIL Caterpillar parts 374F L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4222064
422-2064
4222064

Caterpillar 4222064 COOLER GP-ENGINE OIL

Buy COOLER GP-ENGINE OIL 4222064 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 4222064:

EXCAVATOR 374F L Caterpillar

Number on catalog scheme: 4

Caterpillar 4222064 Parts scheme COOLER GP-ENGINE OIL

For full view, you need register

Information:

Torque converter inlet pressure (R1) - Brown
Torque converter outlet pressure (R2) - Red
Brake pressure (R3) - Yellow
Case pressure of steering charge pump (R4) - Orange
Implement pump pressure (R5) - Green
Load sensing signal pressure (R6) - Blue
Cylinder calibration port (E1) Location of Other Pressure Taps and Diagnostic Ports
Illustration 3 g02498504
View of the rear of the transmission
Illustration 4 g02498799
View of the steering pump at the rear of the engine
Illustration 5 g03003617
View of the left side of the front engine compartment
Illustration 6 g02498636
View of the implement pump at the rear of the engine
Illustration 7 g02515536
View of the rear of the transmission
Table 1
Other Pressure Taps
Port Description
P1 Pressure of transmission relief valve
P2 Transmission lube pressure
P3 "X1" port for the steering pump
P4 "X2" port for the steering pump
P5 "Ps" Control pressure to the steering pump control
P6 "H" Pressure of steering charge pump at the filter outlet
P7 "L" Case pressure of implement pump
P8 "1" Clutch Pressure for REVERSE
P9 "2" Clutch Pressure for FORWARD
P10 "3" Clutch Pressure for third gear
P11 "4" Clutch Pressure for second gear
P12 "5" Clutch Pressure for first gear Tap (P1) and port (P2) are located on the back of the transmission. These taps are accessible from the back of the machine.Port (P3), and port (P4) are used for adjusting neutral on the steering pump. These ports are located on the top of the pump. Port (P5) is also located on the steering pump. These ports are accessible through the floorplate of the cab. Tap (P6) is located on the charge filter. The charge filter is located in the left front engine compartment.Tap (P7) is located on the implement pump. Tap (P7) can be accessed through the floorplate of the cab.
Illustration 8 g02501477
Caterpillar Electronic Technician port (E2) Port (E2) is located inside the cab below the fuse panel.