COOLER AS 4493065 - Caterpillar

Illustration 1 g02565437
Table 1
Specification for 6V-0927 Electric Starting Motor Gp
Item Qty Part Specification Description
B - - The clearance between the pinion and the housing is 9.1 mm (0.36 inch).
1 2 6V-8188 Nut Torque to 30.5 3.5 N m (270.0 30.0 lb in).
2 1 338-3453 Starting Motor Solenoid Current consumption at 20V and 25 °C (77 °F):
1. For Pull-in windings is 49.3 3.3 amp
2. For Hold-in windings is 6.8 amp max
3 1 6V-8188 Nut Torque to 30.5 3.5 N m (270.0 30.0 lb in).
4 1 4B-2049 Nut Torque to 2.25 0.25 N m (20.00 2.00 lb in).
5 1 4B-2049 Nut The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals.
Torque to 2.25 0.25 N m (20.00 2.00 lb in).
6 1 6V-8188 Nut A maximum of three cable terminals or wire terminals may be used with the battery terminal nut (5). A maximum of two of the terminals may be equal to or greater than 0 AWG.
30.5 3.5 N m (270.0 30.0 lb in)
7 1 6V-8188 Nut 30.5 3.5 N m (270.0 30.0 lb in)
- - - When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.
No load performance at 25 °C (77 °F)
1. Speed is 6950 1650 rpm
2. Current draw is 115 25 Amp
3. Voltage is 23 VDC