CORE A,RADIA 0948163 - Caterpillar

Installation Procedure (Type 1)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the gaskets and the O-ring seals. If the gaskets or the O-ring seals are worn or damaged, use new parts for replacement.
Illustration 1 g00499380
Install O-ring seal (6) on the water pump.
Illustration 2 g00569688
Position the water pump and install bolts (5) .
Illustration 3 g00569536
Install the O-ring seal between cover (4) and the water pump. Install cover (4) and bolts (3) .
Install the O-ring seal and the gasket on elbow assembly (2). Lubricate the bore for the O-ring seal lightly with glycerin.
Install elbow assembly (2) and bolts (1) .End By: Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".Installation Procedure (Type 2)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the gaskets and the O-ring seals. If the gaskets or the O-ring seals are worn or damaged, use new parts for replacement.
Illustration 4 g00499380
Install O-ring seal (6) on the water pump.
Illustration 5 g01040996
Position the water pump and install bolts (11) .
Illustration 6 g01040993
Install the O-ring seal between water pump cover (8) and water pump (10) .
Install water pump cover (8) and bolts (9) .
Tighten hose clamp (7) .
Install the alternator bracket and the alternator, if these items were previously removed.End By: Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".